5770308COM ADULT CLOSET SYSTEM B345770308COM0 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first. Call: 1‐800‐489‐3351 (toll free) Monday‐Friday 9am ‐ 5pm CST Visit: www.ameriwoodhome.com WARNING ‐ Unit can tip over causing severe injury or death. ‐ Anchor unit to stud in wall (if instructed to).
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1‐800‐489‐3351 Monday‐Friday 9am ‐ 5pm CST Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1‐2 ESTIMATED ASSEMBLY TIME: 2 HOUR ‐ Open your item in the area you plan to keep it to avoid excessive heavy lifting. ‐ Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Ti p Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification Not actual size C B A D Upper Left End Panel Upper Right End Panel Lower Left End Panel Lower Right End Panel 35770308010 35770308020 35770308040 35770308030 F E Divider 35770308050 G x2 Rail 35770308070 Support 35770308060 I ameriwoodhome.
Board Identification Not actual size O N M Right Drawer Side 36860331140 Left Drawer Side 36860331130 Q Bottom Shelf 35770308170 T Upper Back Panel K577030800 ameriwoodhome.com P Drawer Back 35770331150 R Drawer Bottom 35770331160 S x4 Cubby Adjustable Shelf 35770308190 Lower Fixed Shelf 35770308180 U The back panel's are paper board construction. they're not made from wood but are required for the assembly of your unit.
Board Identification This piece is paper board construction. It is not made from wood but is required for the assembly of your T unit. H G B I J A K U G D R S E S C S S O M N P L Q F ameriwoodhome.
Part List Actual Size 1 x16 #A22570 Cam Lock 2 x16 #A22510 Cam Bolt 6 x12 #A23030 2" Flat Head 1-1/4" Pan Head x22 #A21660 Wood Dowel 7 8 x4 x10 #A11600 #A11080 1‐1/4" Flat Head 7/16" Flat Head 11 x6 #A13020 3 12 x6 #A20940 Wall Anchor ameriwoodhome.
Part List Not Actual Size 15 14a Left Cabinet Member 14b Right Left Cabinet Drawer Member Runner #A56770 Drawer Slide Package 14c 14d X2 #A54213 Drawer Bracket Right Drawer Runner 17c 17a 17d 16 17b X1 #A84050 X3 #I20630 Telescoping Tube ameriwoodhome.
Step 1 17a 5 17b 9 (x6) (x1) (x3) #A12120 #A84050 #A53600 Assemble the rail (G) and the top (H) using the angle brackets and screws. Attach the wall anchor bracket as shown. 9 (x3) G 1st 5 H 17b H 17a 2nd G *Raw edges are shaded ameriwoodhome.
Step 2 3 (x4) #A21660 2 (x4) #A22510 Insert two wood dowels and two cam bolts into upper left end panel (A) & upper right end panel (B). 2 A&B 3 ameriwoodhome.
Step 3 Quick Assembly Tip 1 (x4) #A22570 3 (x4) #A21660 Proper orientation of CAM LOCK Insert four wood dowels and four cam locks into upper fixed shelf (J). 3 1 1 J 3 ameriwoodhome.
Step 4 5 9 (x6) #A12120 (x3) #A53600 2 (x4) #A22510 Assemble the rail (G) and the center shelf (k) using angle brackets and screws. Insert four cam bolts as shown below. (x3) 9 5 G K 2 *Raw edges are shaded ameriwoodhome.
Step 5 UNLOCK Attach the upper left end panel (A) & upper right end panel (B) to the upper fixed shelf (J) using the cam system. B J A *Raw edges are shaded ameriwoodhome.
Step 6 6 (x8) #A23030 Attach the top (H) and the center shelf (J) to the upper left end panel (A) & upper right end panel (B) using eight screws. 6 H B J A K 6 ameriwoodhome.
Step 7 14a 8 (x3) #A11080 (x1) #A56770 Attach the left drawer slide to the lower left end panel (C) as shown below. 8 C 14a Drawer slide is marked with an "L" *Raw edges are shaded ameriwoodhome.
Step 8 3 1 2 (x2) (x4) (x2) #A21660 #A22510 #A22570 Insert four cam bolts, two cam locks, and two wood dowels into the lower left end panel (C). Quick Assembly Tip Proper orientation of CAM LOCK C 1 2 3 *Raw edges are shaded ameriwoodhome.
Step 9 14b 8 (x3) #A11080 (x1) #A56770 Attach the right drawer slide to the lower right end panel (D) as shown below. 8 D 14b Drawer slide is marked with an "R" *Raw edges are shaded ameriwoodhome.
Step 10 1 3 2 (x2) (x4) (x2) #A21660 #A22510 #A22570 Insert four cam bolts, two cam locks, and two wood dowels into the lower right end panel (D). Quick Assembly Tip Proper orientation of CAM LOCK D 1 2 *Raw edges are shaded ameriwoodhome.
Step 11 Quick Assembly Tip 3 (x4) #A21660 1 (x4) #A22570 Proper orientation of CAM LOCK Insert four wood dowels and four cam locks into lower fixed shelf (R). 3 1 R 1 3 ameriwoodhome.
Step 12 3 (x2) #A21660 Insert two wood dowels into large holes in divider part (E). 3 E 3 *Raw edges are shaded ameriwoodhome.
Step 13 5 3 (x4) #A21660 1 (x4) #A22570 9 (x3) #A53600 (x6) #12120 Assemble the support (F) to the bottom shelf (Q) using angle brackets and screws. Insert cam locks and wood dowels as shown below. 1 3 1 Q F 9 3 (x3) *Raw edges are shaded ameriwoodhome.
Step 14 6 (x2) #A23030 Attach the bottom (Q) to the divider (E) using two screws. E Q 6 *Raw edges are shaded ameriwoodhome.
Step 15 6 (x2) #A23030 Attach the lower fixed shelf (R) to the divider (E) using two screws. Q E R 6 ameriwoodhome.
Step 16 UNLOCK LOCK Attach the lower left end panel (C) and the lower right end panel (D) to the assembly from the previous step using the cam lock system as shown. D R E F C ameriwoodhome.
Step 17 5 9 (x2) #A53600 (x4) #A12120 For this step you’ll need to carefully place the unit on its front face as shown. Attach the support (F) to the lower left end panel (C) and lower right end panel (D) using angle brackets and screws. C D F 9 5 ameriwoodhome.
Step 18 UNLOCK LOCK Place the unit back onto its back side and assemble the upper and lower portion of the unit using the cam lock system as shown. H A B J K R D E Q C ameriwoodhome.
Step 19 13 (x30) #A21110 2 people are required for this step. Carefully turn the unit over onto its front side as shown. Assure that the unit is square. Distance from corner to corner must be equal as shown. 1st 13 B 2nd Align the upper back panel with the top of the unit. Align the side edges with the edge of the left upper end panel (A) and right upper end panel (B) and nail straight into the back edges as shown.
Step 20 15 (x2) #A54213 Lay the drawer sides down on a flat hard surface. Carefully line up the drawer bracket with the holes in the drawer side as shown. Using a hammer, tap each drawer bracket stem part way into each hole. Repeat this process until the drawer bracket is fully seated on the drawer side. 15 M ameriwoodhome.
Step 21 9 (x4) #A12120 Attach the drawer front using four screws as shown below. Be sure the groove in the drawer sides are centered with the groove in the drawer front. 9 N M L ameriwoodhome.
Step 22 7 (x4) #A11600 Slide the drawer bottom into the grooves and attach the drawer back using four screws as shown below. 7 O N P finished surface M 7 ameriwoodhome.
Step 23 14c 14d (x1 each) #A56770 8 (x4) #A11080 Attach the drawer slides to the bottom of the left drawer side (M) and right drawer side (N) 8 N O 14d P L M 8 ameriwoodhome.
Step 24 16 10 11 12 (x3) (x6) (x6) (x6) #I20630 #A12700 #A20940 #A13020 First, locate your closet rods where you would like to position them in‐line with the holes in the unit and mark hole locations on the wall. Next, if you are using the anchors to fasten the closet rods, insert them into the wall securely by screwing them into the wall using a screwdriver. Second, use the #A12700 screw to attach your closet rods to your unit as shown on the left side of the unit.
Step 25 Notice, the drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. cabinet member roller drawer runner roller ameriwoodhome.
Step 26 4 (x4) #A80250 Place the shelf spoons into the holes in their desired position and place upper adjustable shelf (I) and cubby adjustable shelves (S) in place as shown. 4 I S S ameriwoodhome.
Step 27 17c For Masonry, Concrete, or other wall materials: x1 #A84050 17d Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI‐TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. WARNING hole Serious or fatal crushing injuries can occur from furniture tipover.
MAXIMUM LOADS This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 50 Lbs. each 22.7 Kg. each 50 Lbs. 22.7 Kg. 40 Lbs. 18.2 Kg. 20 Lbs. 9.1 Kg. 20 Lbs. 9.1 Kg. Warning: Risk of injury to persons ‐ do not place a television on this furniture. This furniture is not approved for use with a television. ameriwoodhome.
CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. 50 Lbs. each 22.7 Kg. each 50 Lbs. 22.7 Kg. 40 Lbs. 18.2 Kg. 20 Lbs. 9.1 Kg. 20 Lbs. 9.1 Kg. ADVERTENCIA: Riesgo de lesiones a las personas ‐ no coloque un televisor sobre muebles. Este mueble no está aprobado para su uso con un televisor. ameriwoodhome.
CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s’effondrer, et/ou causer des blessures graves. 50 Lbs. each 22.7 Kg. each 50 Lbs. 22.7 Kg. 40 Lbs. 18.2 Kg. 20 Lbs. 9.1 Kg. 20 Lbs. 9.1 Kg. AVERTISSEMENT : Risque de blessure corporelle ‐ ne pas placer une télévision sur ce meuble. Ce meuble n'est pas approuvé pour une utilisation avec une télévision. ameriwoodhome.
Register your product to receive the following: * New trend details ‐ sneak peek on what's new * Surveys ‐ have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit ameriwoodhome.
Español Consejos Útiles (página 2) ‐ Abra su artículo en el área donde usted planea utilizarlo para evitar levantar y moverlo menos ‐ Identificar, ordenar y contar las piezas antes de intentar ensamblar ‐ Las clavijas de compresión se golpean con un martillo ‐ Las diapositivas están marcadas con una R (derecha) y L (izquierda) para la colocación correcta ‐ Asegúrese de que siempre este el punto locaizado en la parte superior de bloqueador de leva este volteadohacia borde exterior ‐ Utilizar todos los clavos
Español Paso 4 Montar el riel (G) y la plataforma del centro (k) con escuadras y tornillos e inserte cuatro pernos de leva como se muestra a continuación. Paso 5 Fijar el panel del extremo superior izquierdo (A) y el panel del extremo superior derecho (B) al estante fijo superior (J) usando el sistema de leva. Paso 6 Fijar el estante superior (H) y el central (J) en el panel extremo superior izquierdo (A) y en el panel extremo superior derecho (B) usando ocho tornillos.
Español Paso 14 Fijar la parte inferior (Q) en el divisor (E) utilizando dos tornillos. Paso 15 Fijar el estante fijo inferior (R) al divisor (E) utilizando dos tornillos. Paso 16 Fijar el panel del extremo inferior izquierdo (C) y el panel del extremo inferior derecho (D) a la unidad desde el paso anterior utilizando el sistema de bloqueo de leva, como se muestra en la figura. Paso 17 Para este paso, necesitará colocar con cuidado la unidad sobre su cara frontal, como se muestra en la figura.
Español Paso 20 Colocar los lados del cajón hacia abajo sobre una superficie plana y dura. Alinear con cuidado el soporte del cajón con los orificios en el costado del cajón, como se muestra. Golpetear con un martillo cada vástago del soporte del cajón de manera parcial en cada orificio. Repetir este proceso hasta que el soporte del cajón esté completamente asentado en el lado del cajón. Paso 21 Fijar el frente del cajón con cuatro tornillos, como se muestra a continuación.
Español Paso27 17c 17d x1 #A84050 Para mampostería, hormigón u otros materiales de la pared: Consulte a su ferretería local para los anclajes apropiados para fijar firmemente el soporte de seguridad. IMPORTANTE: ESTA UNIDAD DEBE SER ASEGURADA CON LA PARED PARA PREVENIR VOLQUEO. SIGA ESTAS INSTRUCCIONES PARA INSTALAR EL SOPORTE DE SEGURIDAD ANTIVOLQUEO SUMINISTRADO CON ESTE PRODUCTO.
Español Registre su producto para recibir lo siguiente: Registre * Detalles de nuevas tendencias ‐ Vistazo a lo nuevo * Encuestas ‐ alec su voz entre su comunidad * Códigos de ofertas y descuentos exclusivos * Fácil y rápido servicio de partes de remplace Para registrar su producto, visite ameriwoodhome.
Français Astuces Utiles (page 2) ‐Ouvrez votre article dans la zone que vous prévoyez de le garder pour moins de levage lourd ‐Identifier, trier et compter les pièces avant d'essayer d'assembler ‐Les goujons de compression sont taraudés avec un Marteau ‐Les glissières sont marquées d'un R (droit) et d'un L (gauche) pour un bon placement ‐Assurez‐vous toujours de faire face la pointe situé sur le haut de la Serrure de Came vers le bord extérieur ‐Utiliser tous les clous fournis pour le panneau arrière et les
Français Étape 5 Fixez le panneau de fermeture supérieur gauche (A) et le panneau de fermeture supérieur droit (B) à l'étagère fixe supérieure (J) en utilisant le système de boulons et de serrures batteuses. Étape 6 Fixez l'étagère du haut (H) et l'étagère médiane (J) au panneau de fermeture supérieur gauche (A) et au panneau de fermeture supérieur droit (B) en utilisant huit vis. Étape 7 Fixez la glissière pour tiroir gauche au panneau de fermeture inférieur gauche (C) comme montré ci‐dessous.
Français Étape 16 Fixez le panneau de fermeture inférieur gauche (C) et le panneau de fermeture inférieur droit (D) à l'assemblage de l'étape précédente en utilisant le système de boulons et de serrures batteuses comme montré. Étape 17 Pour cette étape, vous aurez besoin de placez l'unité délicatement sur sa face avant comme montré. Fixez le support (F) au panneau de fermeture inférieur gauche (C) et au panneau de fermeture inférieur droit (D) en utilisant les équerres de fixations et les vis.
Français Étape 20 Posez le tiroir sur un de ses côtés sur une surface solide et plate. Alignez soigneusement l'équerre de tiroir avec les trous sur le côté du tiroir, comme montré. En utilisant un marteau, fixez l'équerre de tiroir en utilisant les trous. Répétez ce processus jusqu'à ce que l'équerre de tiroir soit bien fixée aux côtés du tiroir. Étape 21 Fixez l'avant du tiroir en utilisant quatre vis comme montré ci‐dessous.
Français Étape 27 17c 17d x1 #A84050 Pour la maçonnerie, béton ou d'autres matériaux de mur: Consultez votre magasin local de matériel pour les ancrages appropriés pour fixer le support de sécurité. IMPORTANT: CET APPAREIL DOIT ÊTRE FIXÉ AU MUR POUR AIDER À PRÉVENIR LE BASCULEMENT. SUIVRE CES INSTRUCTIONS POUR INSTALLER LE SUPPORT DE SÉCURITÉ ANTI‐BASCULEMENT FOURNI AVEC CE PRODUIT. ATTENTION Blessures par écrasement graves ou mortelles peuvent se produire par le renversement des meubles.
Français Enregistrez votre produit pour recevoir les éléments suivantes: Enregistrez * Détails sur les nouvelles tendances ‐ un aperçu sur les nouveautés * Sondages ‐ avoir une voix au sein de notre communauté * Offres exclusives et codes promo * Service de pièces de rechange rapide et facile Pour enregistrer votre produit, visitez ameriwoodhome.
Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2. This certificate applies to compliance of this product with the CPSC Ban on Lead‐Containing Paint (16 CFR 1303). 3. This product is distributed by: Dorel Home Furnishings, Inc. 410 East First Street South Wright City, MO 63390 636‐745‐3351 4. Site of Manufacture: □ Tiffin OH 5. See front page of instruction manual for date of manufacture. Certificado de Conformidad 1.
