Instructions / Assembly

35
ameriwoodhome.com

Step27
IMPORTANT:THISUNITMUSTBESECURETOTHEWALLTOHELPPREVENTTIPOVER.FOLLOW
THESEINSTRUCTIONSTOINSTALLTHEANTI‐TIPPINGSAFETYBRACKETPROVIDEDWITHTHIS
PRODUCT.
 WARNING

Serious or fatal crushing injuries
can occur from furniture tipover.
To prevent tipover:
*Installtipoverrestraintprovided
*placeheaviestitemsinthe
lowestdrawers
*Unlessspecificallydesignedto
accomodate,donotsetTVsor
otherheavyobjectsonthetopof
thisproduct
*Neverallowchildrentoclimbor
hangondrawers,door,orshelves
*Neveropenmorethan one
drawer
atatime
Use of tipover restarints may only
reduce, but not eliminate the risk
of tipover
For Masonry, Concrete, or other
wall materials:
Consultyourlocalhardwarestore
forappropriateanchorsto
securelyattachthesafetybracket.
OPTION 1: Attachment into a wall stud (preferred method)
Usingastudfin der,locateastudinthewall.Placeyourunitagainstthewall,withthesafetybracket
alignedinthislocation.Tomakedrivingthescreweasier,youcandrilla1/8"diameterpilothole(3mm)
throughthesafetybracketintothestud.Drivethescrewthroughthe
safetybracketintothewallstud.
Tightenthescrewthatwasnotfullytighenedinstep5.

OPTION 2: Attachment into drywall
Locateyourunitwheredesiredagainstawallandmarkthewallthroughthesafetybracket,thenmove
yourunitaside.Drilla3/16"diameterhole(5mm)intothewallboard.Tapthewallanchorintothehole
untilitisflush.Moveyourunitintolocationandfastenthewallbracket
tothewallanchorwiththe
screw.Tightenthescrewthatwasnotfullytightenedinstep5.

x1
#A84050
stud
wallboard
hole
Tube
You
17d
17d
17c
17c