2276335COM Fireplace / TV Stand B342276335COM0 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first. Call: 1‐800‐489‐3351 (toll free) Monday‐Friday 9am ‐ 5pm CST Visit: www.ameriwoodhome.com WARNING Unit can tip over causing severe injury or death.
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1‐800‐489‐3351 Monday‐Friday 9am ‐ 5pm CST Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1‐2 ‐ Open your item in the area you plan to keep it to avoid excessive heavy lifting. ‐ Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Ti p Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
k Quic bly em Ass Ti p Before You Start Please Note: You may need to lightly tap the wood dowels into the holes during your assembly process. ameriwoodhome.
Board Identification Not actual size A B Left Panel 32276335010 Right Panel 32276335020 C D Left Partition 32276335030 Right Partition 32276335040 G F Top 32276335060 H Shelf 32276335080 Bottom 32276335070 J K I Adjustable Shelf (x2) 32276335090 Kick 32276335110 TV Rail 32276335100 ameriwoodhome.
Board Identification Not actual size These pieces are paperboard construction. They are not made from wood, but are required for the assembly of your unit. BACK PANEL BACK PANEL Upper Back Panel K227633500 Lower Back Panel (x2) K2227633510 F J BACK PANEL B I H BACK PANEL D A ameriwoodhome.
Part List Actual Size 1 2 5 3 4 (x20) #A22700 cam lock 6 (x15) #A12120 7/16" screw (x20) #A22710 cam bolt 7 (x16) #A21670 wood dowel (x6) #A23030 confirmat 8 (x2) #A22920 connector 9 10 (x2) #A53510 angle bracket (x2) #A22910 connector bolt (x56) #A21110 nail (x8) #A80250 shelf support Not Actual Size 11 (x2) #A54270 metal plate #B64358 TV Warning Label (x1) #A95060 fireplace insert ameriwoodhome.
STEP 1 Quick 2 1 (x3) Assembly 3 (x5) Tip Proper orientation of CAM LOCK (x2) 2 2 2 A 1 2 1 3 1 3 ameriwoodhome.
STEP 2 Quick 2 1 (x3) Assembly 3 Tip Proper orientation of CAM LOCK (x2) (x5) 2 2 2 2 B 1 2 1 3 1 3 ameriwoodhome.
STEP 3 3 1 Quick Assembly Tip (x4) (x4) Proper orientation of CAM LOCK 1 C 1 3 3 1 D 1 3 ameriwoodhome.
STEP 4 5 (x2) 5 E 5 Be sure connector (5) is positioned as shown before inserting into hole. Tap with a hammer to fully insert. ameriwoodhome.
STEP 5 2 8 (x6) (x2) 8 2 2 2 2 8 F J 2 2 ameriwoodhome.
STEP 6 6 11 (x2) (x8) F J 6 6 6 F 11 J ameriwoodhome.
STEP 7 Quick 3 1 Assembly Tip (x4) (x4) Proper orientation of CAM LOCK 3 1 3 G 1 1 3 1 3 ameriwoodhome.
STEP 8 Quick 2 1 3 (x4) (x4) Assembly Tip Proper orientation of CAM LOCK (x4) 3 1 3 2 2 2 H 1 2 1 3 1 3 ameriwoodhome.
STEP 9 1 6 (x2) (x2) Quick 7 Assembly Tip (x2) Proper orientation of CAM LOCK 1 6 7 1 K Note: Angle Bracket to be flush with top edge. ameriwoodhome.
STEP 10 6 (x2) K Finished Edge G 6 K Note: Do not fully tighten the screws (6) going into the bottom (G). ameriwoodhome.
STEP 11 UNLOCK Finished Edges Will Face Up H D C ameriwoodhome.
STEP 12 4 (x4) Finished Edges Will Face Up H D 4 C G 4 4 4 ameriwoodhome.
STEP 13 UNLOCK A H K G ameriwoodhome.
STEP 14 UNLOCK B H K G ameriwoodhome.
STEP 15 5 Turn clockwise to lock in place. E F ameriwoodhome.
STEP 16 4 (x2) UNLOCK LOCK Notice: After top (F) is attached, attach divider (E) to the shelf (H) with two screws (4). J 4 B F H A ameriwoodhome.
STEP 17 9 (x56) IMPORTANT! THE BACK PANELS ARE A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. 9 Carefully turn your unit over on its front side as shown. Attached the back panels as shown nailing straight into the raw edges. Assure that our unit is square. Distance from corner to corner must be equal as shown. BACK PANEL Raw Surface BACK PANEL BACK PANEL Raw Surface G B Notice: Now tighten screws (6) in angle brackets (7) that were left loose in step 10.
STEP 18 Carefully stand your unit upright. Insert the fireplace insert into the opening. You will want the fireplace insert to be positioned 1/8" inward from the front edge of the partitions. ameriwoodhome.
STEP 19 6 From the back of the unit, attach the three brackets to the back of the fireplace insert. Using screws (6), attach the brackets to the bottom and sides. There will be a pilot hole for attachment. (x3) 6 6 6 ameriwoodhome.
STEP 20 10 (x8) 10 10 I 10 10 I Finished Edges Will Face Out ameriwoodhome.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. Apply TV warning label to your unit for future reference. Notice: Once you apply this label to your unit, you cannot remove it. Maximum TV (flat screen) 69" #B64358 TV Warning Label 120 lbs 54.4 kg 15 lbs 6.8 kg 15 lbs 6.8 kg Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc.
Register your product to receive the following: * New trend details ‐ sneak peek on what's new * Surveys ‐ have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit ameriwoodhome.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1‐800‐489‐3351 (Gratis) Lunes ‐ Viernes 9am ‐ 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 11 Asegúrese de que el conector (5) esté colocado como se muestra antes de insertarlo en el orificio. Dé unos toques con un martillo para insertar completamente. Página 16 Nota: Soporte angular para enrasar con el borde superior. Página 17 Nota: No apriete completamente los tornillos (6) que van a la parte inferior (G). Página 22 Gírelo en el sentido de las agujas del reloj para bloquearlo.
Español Página 26 Desde la parte posterior de la unidad, conecte los tres soportes a la parte posterior del inserto de la chimenea. Usando tornillos (6), fije los soportes a la parte inferior y a los lados. Habrá un agujero piloto para la fijación. Página 28 CARGA MAXIMA Esta unidad ha sido diseñada para soportar las cargas máximas mostradas. Exceder estos límites de carga podría causar flacidez, inestabilidad, colapso del producto y/o lesiones graves.
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez‐nous: 1‐800‐489‐3351 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale Visitez: www.ameriwoodhome.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Français Page 11 Assurez‐vous que le connecteur (5) est positionné tel qu'indiqué avant de l'insérer dans le trou. Tapez dessus avec un marteau afin de l'enfoncer complètement. Page 16 Remarque : l'équerre doit être alignée avec le bord supérieur. Page 17 Remarque : Ne serrez pas entièrement les vis (6) qui vont dans le fond (G). Page 22 Faites tourner dans le sens des aiguilles d'une montre afin de verrouiller en place.
Français Page 26 Par l'arrière du meuble, fixez les trois équerres à l'arrière du foyer encastrable. À l'aide de vis (6), fixez les équerres sur le fond et sur les côtés. Il y a aura un avant‐trou pour la fixation. Page 28 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. Le dépassement de ces limites de charge peut causer un affaissement, une instabilité, un effondrement du produit et/ou de graves blessures.
