Installation Guide

88-MACC020-1A-EN 3
Installer's Guide
2. Place the packaged unit on top of the curb. Using
three (3) additional #12x3/4” self-drilling screws per
bracket, attach the brackets to the unit base rail.
NOTE: See Figure 2 for the location of brackets on
******24 - 42 models. Three (3) brackets on each of
the long sides and one (1) bracket on each of the
short sides.
NOTE: See Figure 3 for the location of brackets on
******48 - 60 models. Three (3) brackets on each of
the long sides and one (1) bracket on each of the
short sides.
Figure 2. MAYEXMK002A Bracket Locations on
******24 - 42 Models
HOLD DOWN
BRACKETS
HOLD DOWN
BRACKET
Figure 3. MAYEXMK003A Bracket Locations on
******48 - 60 Models
HOLD DOWN
BRACKETS
HOLD DOWN
BRACKET