Warranty

Ten Year Limited Written Warranty
Standard Lexan* Thermoclick sheet will not break due to loss of impact strength through weathering and will not display excessive
discoloring and loss of light transmission as defined herein, within ten (10) years of date of sale by SABIC Innovative Plastics.
1) This limited written warranty applies solely to Lexan
Thermoclick sheet glazing produced by SABIC
Innovative Plastics in Europe with a gauge of 1.57”
and/or 1.97” in the color standard Blue (BL6C024T),
Green (GN7C018T), Purple (VT5C010T), Red
(RD7C005T), Orange (OR6C012T), Yellow
(YW9C007T), Metallic (GY6A744M), IR Green
(GN8B038T), IR Blue (BL8B089T) and IR Grey
(GY5B422T), used correctly as vertical glazing,
handled, stored, processed, installed and maintained
according to SABIC Innovative Plastics’
recommendations contained in the Technical Manual.
In all cases, the surface bearing the UV protection
must be the only side exposed to direct sunlight and
the effects of weather.
2) This limited written warranty does not apply to sheet
that has been thermoformed, scratched, abraded or
exposed to corrosive materials or chemicals.
3) This limited written warranty is given only to the
original purchaser of SABIC Innovative Plastics sheet
and does not extend to any subsequent purchaser or
transferee. Any warranty claim hereunder must be
made immediately within the warranty period by
specifying the claim in writing and submitting to SABIC
Innovative Plastics the original sales receipt which
must contain the name and address of the purchaser,
the date of purchase, the complete product name, the
lot number and the volume purchased. On request of
SABIC Innovative Plastics claimant must allow the
material to be inspected on site and/or return the
sheet to SABIC Innovative Plastics for testing.
4) For the purpose of this limited written warranty:
• Penetration by hail: This product shall be warranted
against hail breakage (defined as surface penetration
that permits water to leak through the sheet) from
hailstones up to 7/8” (22.2mm) traveling at speeds up
to 100ft/sec (30m/sec). Resolution of claims will be
determined through subsequent impact testing on a
undamaged sample of the sheet in question using the
ASTM 3029/Ford Modified Gardner Test. A 7/8”
hailstone traveling at 100ft/sec equates to 5 ft-lbs
force on the above test. Any sheet which sustains
surface penetration at less than 5 ft-lbs when tested
shall entitle the purchaser thereof to replacement
sheet in accordance with schedule under item 6. The
warranty does not cover impact failures or breakage
caused by other means, intentional or unintentional.
• Color difference will be determined by subjecting a
cleaned sheet sample to the Color Test CIELAB (1976).
Any claims for sheets displaying a delta E of 15 or less,
compared with their original value, will not be
accepted.
This limited written warranty is subject to the following conditions:
• Loss of light transmission will be determined by subjecting a
cleaned sheet sample to the Light Transmission Test ASTM
D1003 (1977). Any claims for sheets displaying a loss of light
transmission of 6 % or less compared to the original value, will
not be accepted.
5) SABIC Innovative Plastics reserves the right to investigate
independently the cause of any failure.
6) If a claim under this limited written warranty is justified, SABIC
Innovative Plastics will provide the purchaser with replacement
material free of charge in accordance with the following
schedule:
Time from Orig. Purchase Date Material Replacement
Up to 5 years 100%
in 6th year 75%
in 7th year 60%
in 8th year 45%
in 9th year 30%
in 10th year 15%
If replacement material cannot be provided within a reasonable
period of time, SABIC Innovative Plastics may opt to refund
the original purchase price paid to SABIC Innovative Plastics,
or a portion thereof, in accordance with the above schedule.
7) This limited written warranty shall be SABIC Innovative
Plastics sole liability and customer’s exclusive remedy for the
products and all other claims for damages are excluded. The
limited written warranty is in lieu of all other warranties (except
of title), written or oral, statutory, express or implied,
including any warranty of merchantability or fitness of purpose.
This ten (10) year limited written warranty shall be governed
by the laws of the State of New York, United States of America.
8) This limited written warranty has been issued on July 16
th
,
2009, is restricted to material sold by SABIC Innovative
Plastics after such date and supersedes all previously issued
warranties for the products mentioned above.
Lexan*
Warranty Conditions Lexan* Thermoclick Sheet Colors Warranty
* Trademark of SABIC Innovative Plastics IP BV