Installation Instructions

or mild detergent.
Rinse sheets with lukewarm water.
Dry sheets with soft cloth to prevent water spotting.
Do not scrub or use brushes, brooms, or any cleaning tool that may easily cause
abrasion.
Never use corrosive chemical detergents.
To remove adhesive agents or spots left by masking films or logos, utilize kerosene
or alcohol solvents with soft cloth.
Do not use gasoline.
Wash sheets again after applying the above mentioned cleaning materials.
CHEMICAL RESISTANCE
CoverLite polycarbonate sheet is generally unaffected by acids, alcohol, glycols,
mineral oil, animal and vegetable fats, kerosene and non-abrasive cleaners. CoverLite
polycarbonate sheet is affected by benzene, petrol, ketones, acetone, phenols,
chlorinated and aromatic hydrocarbons, petroleum-based paints, abrasive cleaners and
solvents.
INCOMPATIBLE MATERIALS
Acetaldchyde, acetate acid, acetone, acrylonitrile, ammonia, hydrogen floride, hydrogen
sulphide, benzone, benzoate acid, benzoate alcohol, calcium nitrate bormoxynil, phenol,
carbon disulfide, carbon tetrachloride, 5% potassium hydroxide. Solutions, 5%
sodium hydroxide solutions or caustic soda, chlorobenzilate, chloroform, m-cresol,
cyclohexanone, cyclohexenc, dimethy formamide, dioxathe, ethylamine, ethyl ether,
2-ethylene, chlorohydrin, gasoline, methyl methacrylate, nitrobenzene, benzoate
ethylalcohal, phenol, phosphorus trichloride, prionic acid, styrene, 1.1,2,2,-tetrachloro
ethane, tetrahydrofuran, tolene, 10% trichloroacetic acid, xylene, ammonia hydroxide,
ketone, methyl ethyl ketone, dichloromethane, poly yinyl chloride, potassium hydrxide,
sodium hydroxide and nitric acid, etc.