Specification

ManualsBrandsAmericover ManualsPaint20 ft. x 100 ft. 4-mil Black Fire Retardant Poly Construction Film

SGS

CLIENT: AMERICOVER, INC.

2067 Wineridge Pl., Ste. F

Escondido, CA 92029

Teven Riedel

Test Report No: 587090 Date: April 13, 2006

SAMPLE ID: The Client submitted and identified the following test material as 4 mil

Polyethylene Film, Black.

DATE OF RECEIPT: Entered into SGS USTC sample tracking system on March 31, 2006.

TESTING PERIOD: April 13, 2006.

AUTHORIZATION: Testing authorized by Teven Riedel.

TEST REQUESTED: The sample material was tested in accordance with the procedures outlined

in NFPA 701 Fire Test Method 1 (small scale) 2004 Edition “Standard

Methods of Fire Tests for Flame-Resistant Textiles and Films”.

TEST RESULTS: Pass. See page 2 for detailed results. See Performance Criteria on page 2.

Tested by Signed for and on behalf of

SGS U.S. Testing Company

Inc.

Brian Ortega Test Technician Greg Banasky

Supervisor Fire Technology

Page 1 of 2

This report is issued by SGS U.S. Testing Company Inc. under its General Conditions for Testing Services (copy available on request). SGS U.S. Testing’s responsibility under this report is limited

to proven negligence and will in no case be more than the amount of the testing fees. Except by special arrangement, samples are not retained by SGS U.S. Testing for more than 3Q days. The

results shown on this test report refer only to the sample(s) tested unless otherwise stated, under the conditions agreed upon. Anyone relying on this report should understand all of the details of

the engagement. Neither the name, seals, marks nor insignia of SOS U.S. Testing may be used in any advertising or promotional materials without the prior written approval of SGS U.S. Testing.

The test report cannot be reproduced, except in full, without prior written permission of SOS U.S. Testing Company Inc.

Consumer Testing Services: 8385 White Oak Avenue, Rancho Cucamonga, CA 91730 t (909) 483-0250 f (909) 483-0336 wwwsgs.com

Member of the SGS Group

SGS U.S. Testing Company, Inc.

Summary of content (9 pages)

PAGE 1
SGS CLIENT: AMERICOVER, INC. 2067 Wineridge Pl., Ste. F Escondido, CA 92029 Teven Riedel Test Report No: 587090 Date: April 13, 2006 SAMPLE ID: The Client submitted and identified the following test material as 4 mil Polyethylene Film, Black. DATE OF RECEIPT: Entered into SGS USTC sample tracking system on March 31, 2006. TESTING PERIOD: April 13, 2006. AUTHORIZATION: Testing authorized by Teven Riedel.
PAGE 2
SGS CLIENT: Report No.: 587090 Date: April 13, 2006 Page: 2 of 2 AMERICOVER, INC. TEST RESULTS: 4 mil Polyethylene Film, Black Specimen No. 6.0 4.0 0 Initial Weight, g. Final Weight, g. Weight Loss, g. Percent Weight Loss Time of Flaming of pieces on floor (seconds) 1 5.8 5.0 0.8 13.8 0 2 5.5 5.3 0.2 3.6 0 3 5.5 5.4 0.1 1.8 0 4 5.6 5.1 0.5 8.9 0 5 5.8 5.7 0.1 1.7 0 6 5.9 5.7 0.2 3.4 0 7 5.5 5.3 0.2 3.6 0 8 5.7 5.2 0.5 8.8 0 9 5.7 5.1 0.6 10.5 0 10 5.5 5.3 0.2 3.
PAGE 3
PAGE 4
SGS CLIENT: AMERICOVER, INC. 2067 Wineridge Pl., Ste. F Escondido, CA 92029 Teven Riedel Test Report No: 174451-2 Date: February 25, 2003 SAMPLE ID: The Client submitted and identified the following test material as Black 4 mil FR Film. DATE OF RECEIPT: Entered into SGS USTC sample tracking system on January 31, 2003 as STN 35912. TESTING PERIOD: February 24, 2003. AUTHORIZATION: Testing authorized by Rob Barry.
PAGE 5
SGS CLIENT: Report No.: 174451-2 Date: February 25, 2003 Page: 2 of 2 AMERICOVER, INC. PREPARATION AND CONDITIONING: The sample was submitted in two pieces 24” wide by 12’ long, conforming to chamber dimensions. The sample was supported during testing by 2” hexagonal mesh poultry netting running the length of the test chamber and ¼” round metal rods placed at two foot intervals across the width of the test chamber. Prior to testing, the specimen was placed in the conditioning room (maintained at 73.
PAGE 6
PAGE 7
Certificate of Compliance Subject: 4 & 8 mil Black Polyethylene FR ( Also Known as Blown Black) Description: 4 and 8 mil Black Polyethylene FR UVI A polyethylene based formulation with fire retardant additives and UV inhibitors. The color is black. This film is opaque and slightly embossed.
PAGE 8
4 Mil Black Plastic Material Safety Data Sheet SECTION I MANUFACTURER’S NAME EMERGENCY TELEPHONE NO. 800-747-6095 Americover Inc ADDRESS (Number, Street, City, State and Zip Code) 2067 Wineridge Pl., Ste. FEscondido, CA 92029 PRODUCT IDENTIFICATION USE/DESCRIPTION Fire Retardant 4 mil black polyethylene DATE OF MOST RECENT REVISION Protective Plastic Sheeting 1/18/06 SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION HAZARDOUS COMPONENTS CAS NO.
PAGE 9
SECTION V - REACTIVITY DATA STABILITY UNSTABLE CONDITIONS TO AVOID STABLE XX INCOMPATIBILITY (Materials to avoid) Oxidizing materials can cause a reaction HAZARDOUS DECOMPOSITION OR BYPRODUCTS As with other organic materials, combustion will produce carbon dioxide and probably carbon monoxide.