System information

WebPro Administration Guide Page 37
MB 24-02: Transfer System Options
This memory block adjusts the timers and options for transferred calls. They are as follows:
01 – Transfer to Busy Extension: This selects if you want the ability to receive a second call
while on the phone. Check the box to enable.
02 – Ringback Tone to Transferred Calls: This selection allows you to choose what the caller
hears when they are transferred. The options are Ringback Tone or Music On Hold (Hold Tone).
03 – Delayed Call Forward Time: This timer adjusts the amount of time a call will ring a phone
before following the call forwarding programing in MB 24-09. This is usually to voice mail.
Gaynor usually sets this timer around 18 seconds, which is about four rings.
04 – Transfer Recall Time: This is the timer is used if a call is not no-answer forwarded to a
destination. After this timer expires, the call will return to the person that transferred the call.
05 ~ 13: These are usually left at default. If you need more information, contact a Gaynor Tech.
MB 24-09: Call Forwarding Fixed Settings
This memory block controls the call forwarding settings for both real and virtual extensions.
When a phone goes to voice mail after it is not answered, that is configured here.
01 – Call Forward Type selects the type of forwarding that will be done. The options are:
 No Call Forward: The call will ring until it is answered.
 Call Forward Both Ring: This is used to make two extensions ring at once. Assign this if
you are using Mobile Extension. Set the phone to have Mobile Extension to both ring
and assign the Mobile Extension number in fields 02~05.