Specifications
System Programing
IM166-107
System Configuration
-
Miscellaneous Features
-
continued
Press ITCM
++#746+#
nhibit, and Override
“BUTON
MAPPING
’
4
telephone user can press a button “ASSIGN DND CODE
”
either one that you have mapped on
3. Select button to be programmed:
tis
or her station or one that is provided
-
Press Al
-
A14,
Bl
-
B8.
)y
an interactive button on an LCD
speakerphone) to set his or her station
4. Select station ports to be programmed with a DND button
o a DND condition.
(LED On = Selected Station):
-
Station 10
-
57: Dial 10
-
57
or press
Cl 0
-
C57.
lou
can inhibit the user’s ability to set
5. Dial
%
for further DND button assignment
Dial
+K
+#
for next button mapping feature.
41~0,
a caller to a DND station can
Dial
+I+
8
+#
for configuration mode.
werride a DND condition if you
To clear, dial 5664, press button, dial # and repeat above steps 4 and 5.
xogram
the calling station to have the
IND
override feature.
l
DND
XXXXXXXX
’
NOTE: When you enable the do not
disturb override feature, the
2. Press
Al
to toggle between enable and disable (LED On = Enable).
system automatically enables
the executive override feature
Dial
1
to Enable
“DND
ENABLED
’
for the station as we//.
‘DND
DISABLED
’
3. Dial
f
for configuration mode.
To change setting, repeat procedure and make opposite selection.
#DND
OVERRIDE
y
3. Select station ports (LED On = Feature Assigned):
-
Station 10
-
57: Dial
10
-
57
or press Cl 0
-
C57.
4. Dial
+R
for next station feature.
Dial
+#
%
for configuration mode.
To change setting, repeat procedure and make different selection.
picking up a call that a user placed on
hold at another station. You can
Dial
1
to enable
*ENABLE EXC HOLD
U
enable or disable it system-wide using
this procedure.
“DISABLE EXC HOLD”
3. Dial
+R
for configuration
mode.
4-6