Specifications

IMl66-107
Installation
Cable Clips
Each cabinet-mounted 50-pin male connector is
equipped with a retaining clip. This clip is designed to
secure the mated connection once it is made. The clip
does this by snapping into a slot on the cable-mounted
connector when it is pressed together with the
cabinet-mounted connector. This retaining clip must
be pulled back slightly to unsnap it before the
connectors can be separated.
Auxiliary Jack
(Impectand DiglTech LCD speakerphones with
product code of 80248 and T7OOS rev I and later)
The auxiliary jack (available on impact 80248 and
DigiTech 7700s Rev. I and later LCD speakerphones)
will support the use of the following devices: a
headset, a tape recorder, an external ringer, or an
external paging device.
The auxiliary jack is a 4-position 616~type handset jack
that provides the following connections:
0 positions 2 and 3 = output from system
to external device
0 positions 1 and 4 = input to system from
headset’s microphone
At any given time, the auxiliary jack will serve
whichever external device that is listed in its display
but it will serve only one of those devices at a time.
The user must program a separate enable/disable
button for each external device that he or she plans to
connect to the auxiliary jack. When a user presses a
particular enable button that he or she has
programmed, that device is the one that is active and
named in the display.
If an external device requires power for its operation,
you must install an external source to supply it. The
system does not supply any power through the
telephone’s auxiliaryjack. The auxiliary jack is an
audio output source for the external ringer, external
paging device, and tape recorder. The jack will accept
an audio input signal from the headset microphone
during headset operation but it is not designed to
receive signals from any other external device or from
a telephone line.
piiicq
With the exception of a headset
microphone, do not connect the audio
output of any external device to the
auxiliary jack. Also, do not connect the tip
and ring leads of a telephone line to the
auxiliary jack. Do not connect any devices
to the auxiliary jack other than those
mentioned in the telephone user’s guide.
You should caution the telephone users
about this fact as well.
If a user needs to connect a tape recorder to his or her
telephone’s auxiliary jack, you must obtain a special
recorder cable made for this purpose from your normal
distribution outlets:
Cl001
CD001
Impact 80248 LCD speakerphone
DigiTech 7700s rev I and later
LCDspeakerphone
Station Connections - Continued on next page . . .
3-11