Specifications

IM166-107
Description Of System Features
Tone Or Voice Signalling (Intercom)
Refer to the discussion titled Intercom.
Transferring Calls
Refer to the discussion titled Cd Transfer.
Transfer/Conference Button
A fixed button is provided that gives quick, easy
transferring and conferencing.
Unanswered Call Transfer Recall Timing
Refer to the discussion titled Call Transfer.
Voice Announce Blocking
Refer to the discussion titled Intercom.
Voice Mail Support
With software release revision 11 A, the digital
telephone system supports the use of voice
processing equipment connected to the system’s
station ports through the ATI-D analog terminal
interface. The ATI-D is a multipurpose m
accessory for the digital telephone system. It has dual
circuits that allow the voice mail equipment to
interface to two station ports. In addition to the
required programming task of identifying the station
ports as voice mail ports, there are several other
programming considerations associated with voice
mail operation that the programmer can make
whenever their options are wanted. These options
include the following features:
Abtomatic Attendant
With the automatic attendant feature, the voice mail
system automatically answers any line that is ringing
at a voice mail port. As a default, the system
automatically enables ringing line preference for any
port the programmer identifies as voice mail ports.
The programmer must choose a ringing assignment
for the lines assigned to the voice mail port before the
voice mail system can provide the automatic attendant
feature.
Automatic Transfer Of Voice Mail
The programmer can choose the immediate transfer
mode for voice mail transfers. However, if he turns on
the screen and/or confim-r options provided by the
voice mail system, he must not choose the immediate
transfer mode because it allows the system to transfer
a call as soon as it answers it precluding any screen
and confirm action that the voice mail equipment can
provide.
Hunt Groups
When a station port that has been assigned to a hunt
group is busy, a call to it will ring at the next idle
station port in the group. A call will try to ring every
port in a hunt group and if all are busy, the telephone
system will return a busy tone to the caller. A
programmer can assign all voice mail ports to a
circular hunt group to take advantage of its
multiple-port interface capability. With this
arrangement, a call will first try to ring at the first port,
then try.the.next one and so forth until it tries all four
ports.
Voice Mail Line ID
The programmer can program the voice mail lines with
identification (ID) numbers that allow the voice mail
equipment to identify which line it is answering. The
ID numbers that the programmer assigns’ here must
match the ID numbers that are selected as part of
voice mail system programming.
Voice Mail Transfer On Busy
The programmer can arrange the telephone system to
alert a busy telephone that the voice mail equipment is
attempting to transfer a call to it. Without this
programming, the voice mail equipment will
automatically route the call to a voice mail box when it
encounters a busy signal. With this option, when the
voice mail equipment tries to transfer a call to a station
that is busy on a call (outside or intercom call) and the
station has an available intercom line (stations can be
programmed to have a second intercom), the intercom
will ring subdued. The user can answer the call by
pressing the button of the ringing intercom line. In
general, attendants will probably desire this feature so
they can handle multiple calls, while other station
users may prefer to have a message taken when they
are already busy on a call.
Zone Paging (Via Station Speakers)
Refer to the discussion titled Paging.
2 - 25