Specifications
Paging
-
continued
Meet-Me Answer Page
Any station user can dial a special code number in
response to an all-call or zone page and be connected
to the paging party in a private conversation. Ail-call
or zone paging is provided to the stations through the
station class of service programming.
Zone Paging
Zone paging allows groups of stations to receive
announcements through the station speakers. The
programming can enable zone paging in up to four
different zones. Zone paging can also be received at
the paging port where it can be connected to the input
of an external paging amplifier. The ability of each
station to originate and/or receive a page and the
arrangement of the paging into different zones are
controlled by station class of service programming.
Zone paging through the paging port is enabled by
system class of service programming.
Memory Retention Without Batteries
The system memory is electronically protected during
AC power failures by an electronic device sometimes
known as a “super cap.” The stored program data will
remain in memory for a minimum of 60 hours provided
that the system has been powered continuously for at
least 30 minutes prior to the power failure or
disconnection. Also, the system clock will continue to
tun and keep time for at least 30 minutes after an AC
power failure or disconnection.
PBWCENTREWCO Compatible
System features and programmable buttons support
the requirements of most PBXs, Central Offices, and
CENTREX
systems. Numbers,
##‘s,
#‘s,
programmable pauses, and flash signals can be made
a part of every stored number for access to host
system feature codes.
Personalized Ringing Tone
Refer to the discussion titled Ringing.
Pooled Line Access (Line Group Access)
Refer to the discussion titled Line Features.
Power Failure Transfer
An installer can connect an industry-standard
telephone such as the model 2500 to a special
connection to
seNe
as a power-fail telephone. If an
AC power failure occurs, the system automatically
connects the power-fail telephone directly to an
outside line. Users can make normal origination and
reception of calls on a power-fail telephone during an
AC power failure. The system will automatically
lMl66-107
Description Of System Features
disconnect the power-fail telephone from the outside
line as soon as AC power returns.
Prime Line Automatic
Refer to the discussion titled Line Features.
Privacy
Automatic Privacy
A programmer can make a line private or non-private
through programming. In the private mode, a station
has exclusive use of the line during a call. No other
station can access that line unless the user of the
private line includes the another station through the
use of the add-on conference feature. In the
non-private mode, another station with that line
appearance can gain access at the same time
(sometimes known as common line pickup).
,A
line is
specified as private or non-private through the line
class of service programming. Through station class
of service programming, a programmer can make a
line non-private at a particular station. Also see the
discussion titled Conferencing.
Privacy
-
Designated Programmable Button
The programmer can arrange for stations to provide a
privacy button. If a line is private, a user can press the
privacy button to change it into a non-private one.
If
the line is non-private, pressing the button will have no
effect. Station class of service programming is used to
program the programmable button function at the
stations.
Privacy Release/Brokerage Service
See the previous paragraph titled Privacy
-
Designatep’
Pfogrammab/e
Button
Private Lines (Access Denied)
See the discussion titled Line Features.
Programmable DSS/BLF
Refer to the discussion titled Automatic Dialing.
Programmable Buttons
A programmer, or in many cases the users
themselves, can make most system features available
at programmable buttons merely by storing the
specific access codes necessary for dialing the
features. Storable features include those that can
utilize lamp (on/off) supervision (e.g., call park orbits).
The system will store all feature access codes except
for those requiring Transfer/Conference button action.
lt
Will
store continuous strings of digits (including
presses of the intercom button) up to the maximum
amount of storable digits (16) allowed in an autodial
entry.
2-19