Specifications

Account Codes - continued
Account Code Button
A programmer can use station class of service
programming to assign an account code button to any
programmable button location at a station as part of
the button mapping procedure. With this account code
button available, the user can press it and then dial an
account code without interrupting the call. Only the
user of the Account Code button will hear the DTMF
tones when he or she dials the code. The distant
on-line party will not hear the DTMF tones, and the
system will not place the line on hold. The user can
hear the distant on-line party while he or she is dialing
an account code. If the telephone does not provide an
account code button, the user must dial an intercom
code before he or she dials the account code digits.
All-Call Paging
Refer to the discussion titled Paging.
Analog Terminal Interface Support
With software release revision 8, the digital telephone
system supports the operation of the Analog Terminal
Interface (ATI-D). The ATI-D is a multipurpose
on-premise accessory with dual circuits that provide
an industry-standard telephone interface. This feature
adapts most industry-standard (IST) devices and the
ExecuMail voice processing system to the digital
telephone system. The ATI-D accepts both tone and
pulse (rotary) dialing from these devices. Each ATI-D
circuit will drive a load with a maximum ringer
equivalence number (REN) of 2.0 thus allowing more
than one IST connection at each ATI-D circuit input.
The ATI-D supports a wide variety of IST equipment
such as model 500 and 2500 telephones, cordless
telephones, answering machines, and FAX machines.
The ATI-D is housed in a metal enclosure ancj is
powered by the telephone system through the station
port connections. It contains a ringing generator to
generate a ringing signal for the IST devices.
Area Paging Interface
Refer to the paragraph titled External Paging interface
found in the discussion titled Paging.
Assist Button
Refer to the discussion titled Messaging.
Automatic Callback
Refer to the discussion titled Intercom.
Description Of System Features
IMl66-107
Automatic Dialing Of Stored Numbers
Automatic Dialing
The system supports up to 22 automatic dial (autodial)
numbers per station. Autodial buttons can store up to
16 digits plus an intercom or line selection. Stored
digits include 9-0, +# and #. The system stores a
pause at any point where the HOLD button is pressed,
and stores a hookflash at any point where the TAP
button is pressed. Automatic dialing provides a way to
obtain one-button access to frequently used system
features. This feature does not require any class of
service to enable it.
Programmable DSWBLF
A station user can store one-button, direct station
selection (DSS) at any memory button location to
create a DSS memory button. When this button is
pressed, any active outside call, is automatically placed
on hold and an intercom call is automatically made to
that previously stored station number. The visual
indicators of the stations programmed at the button
locations form a busy lamp field (BLF). The BLF
conveys station status to the user. An autodial
number can also be programmed as a secondary
function at every DSS/BLF memory location. No class
of service is required.
Station Speed Dial
Each station provides 10 speed dial number locations
at the keypad buttons. Station speed dial numbers
can be up to 16 digits in length and can include line or
intercom selection, numbers, #, ++, pauses, and
hookflash signals. A user can store a pause by
pressing the HOLD button and store a hookflash
signal by pressing the TAP button.
System Speed Dial
The system provides 99 system-wide speed dial
numbers. The system speed dial numbers can be up
to thirty-two digits in length, and can include numbers,
#, +#, pauses, and hookflash signals. The attendant
programs the system speed dial numbers at station 10
or 12 for use at every station in the system. No class
of service programming’ is required.
?
Automatic Hold For Intercom
Refer to the discussion titled Hold.
Automatic Hold - Transfer To Line
Refer to the discussion titled Hold.
Automatic Pause Insertion
Refer to the discussions titled Automatic Dialing and
Recfiahng.
2-2