Specifications

IMl66-107
System Programming
Video Display Terminal Programming Procedure - continued
Menu Descriptions - continued
0 Selection 3 : System timing (system timing
requirements)
l Recall / TAP Time
l Pause Time
l Timed Hold Recall Time
l Transfer Recall Time
l Call Park Recall Time
l Extended DTMF Dialing Tones
0 Selection 4: Load/Save COS data
0 Selection 5 : Serial communication parameters (for
data port A and data port B)
0 Selection 6: COS data printout
0 Selection 7: Set clock date/time.
0 Selection 8: SMDA programming (Configures the
Station Message Detailed Accounting feature. Also
refer to the previous discussions titled lrttegmfed
Call Costing Configuration and Station Message
Detail Accounting/Reporting Configuration for
explainations of call costing and SMDA.)
.
.
.
.
.
.
.
.
.
.
.
.
Assign Area Codes / Prefixes to Bands
Enter band number O-7, enter 0 for no band, or
enter area codes or prefixes as 200-999.
Set Dial Time Limit (non-costed time allowed for
dialing to take place in l/10 min)
Set Answer Time Limit (non-costed time allowed
for call to ring and be answered in l/10 min)
Define Department Numbers (Calls can be
costed on a department basis by department
basis.)
Assign Stations to Departments (for coiting by
department)
Set Account Code Parameters
Call Cost Tables
Call Cost Exception Tables
Automatic Reports (Call cost reports can be
produced for printing.)
SMDA Delete By Attendant (allows attendant to
delete SMDA records)
SMDA Reports
l Selection 9: SMDR print parameters (enables or
disables call cost reporting along with a Station
Message Detail Report).
l Selection 10: Logical/physical assignments -
stations (For example; assign station extension 25
to station port 25.
0 Selection 11: Logical/physical assignments - lines
(For example; assign line 1 to line port 1.
0 Selection 12: Automatic station relocation (allows
individual features to be physically relocated without
losing their programming parameters and extension
asignments)
l Selection 13: Feature inhibit programming (allows
individual features to be inhibited)
l Selection 14: Enable all inhibited features (will
enable all features inhibited with selection 13)
l Selection 15: LCD messages (programs the
messages for the LCD messaging and response
messaging features)
l Selection 16: Software version number (identifies
the software release version of the system)
Line Cos Menu Selections
Line C.O.S. Programming
1. Line Type
2. Line Group Assignment
3. Line Dialing Mode
4. Line Privacy Release
5. Line Toll Restriction Table Assignments
6. Line Abandoned Hold Release Time
7. Set Up a Line ( Using a Model Line )
8. Assign Name to Line
9. Assign Line to Department
10. Exclusive Hold
11 .Voice Mail Line I.D.
12. D.I.S.D. Assignments
13. Caller ID Assignments
14. Return To Previous Menu
Enter Selection:
In each line COS menu selection, after choosing the
feature, enter all line port numbers which are to be
assigned to it.
0 Selection 1: Llne type (specifies the characteristics
of the line port)
l Disabled
l Auxiliary (Configures port for installation of
external paging amplifier.)
l CO/PABX (Typical line connection)
4-83