Specifications

System Programming IMl66-107
Toll Restriction Table Configuration - continued
1 Press lTCM *#7i*. (
Assign Toll Restriction Tables To
Stations
Assign Toll Restriction Tables To
Stations For Night Transfer (of ringing)
Toll tables assigned with this feature have
an effect only when the attendant places
the telephone system in the night transfer
(of ringing) mode of operation.
Assign Toll Restriction Tables To
System Speed Dial Calls
When you enable this feature, the system
applies toll restriction tables that you have
assigned to a station to the system speed
dial calls that users make from that station.
1. Dial 73. “ASSIGN TOLL-STA.”
2. Dial 01 - 16 for toll tables 1-16 to be assigned to station.
QR-
Press Al - A14, Bl, B2 for tables l-16.
(LED On = Selected table)
3. Dial # to finish entry.
4. Select station ports (LED On = station ports to receive tables):
- Station 10 - 57: Dial 10 - 57 or press Cl0 - C57.
5. Dial # for next toll table to station assignment.
-OR-
Dial +K # for configuration mode.
To change setting, repeat procedure ancj make different selection.
TOLL-N ITE”
1. Dial 74.
‘ASSIGN
2. Dial 01 - 16 for toll tables 1 - 16 to be as’gnd.
-OR-
Press Al - A14, Bl, 82 for tables l-16.
(LED On = Selected table)
3. Dial # to finish entry.
4. Select station ports (LED On = station ports to receive tables):
- Station 10 - 57: Dial IO - 57 or press Cl0 - C57.
5. Dial ++ for next toll table to night answer assignment.
-OR-
Dial t +# for configuration mode.
To change setting, repeat procedure and make different selection.
1. Dial 53.
“STATION FEATURES”
2. Dial 05.
‘SYS SPD TOLL RST”
3. Select station ports (LED On = station ports assigned):
- Station 10 - 57: Dial IO - 57 or press Cl0 - C57.
4. Dial +# for next station feature.
-OR-
Dial * +# for configuration mode.
To change setting, repeat procedure and make different selection.
j PressSPKRtoend
4-76