Specifications
System Programming
IMl66-107
Station Message Detail Accounting/Reporting Configuration
-
continued
Station Message Detail Reporting To program for SMDR printout as the system collects it,
(SMDR) Printout
1. Dial 77.
Program the system for the SMDR to
2. Dial 2 .
“SMDR
PRINTXXX
”
Drovide continuous printout of system-wide
3. Press Al to toggle between enable and disable
station call activity as it is collected by the
(Al LED On = Enabled)
system if desired.
-OR-
- Dial 1 to enable printing.
“SMDR
PRINT ON
’
9dditional programming action will cause
(Al LED on).
the printing of the cost of each reported call
-
Dial 2 to disable printing
“SMDR PRINT OFF”
to
be included when the printout occurs.
4. Dial
+K
for configuration mode.
To change setting, repeat procedure and make opposite selection.
To add SMDR cost reporting to the printout,
1. Dial 77.
*SMDR
PRINT
u
2. Dial
1
“XXXXXXX
COSTING
”
3. Press Al to toggle between enable and disable
(Al LED On = Enabled).
-OR-
-
Dial 1 to enable
‘WITH COSTING
a
(Al LED on)
-
Dial 2 to disable.
WITHOUT COSTING
”
4. Dial
+K
for configuration mode.
To change setting, repeat procedure and make opposite selection.
Station Message Detail Accounting
1. Dial 18.
mA’ATTN
DELETE XXX
”
@MDA)
Records Deleted By The
2. Press
Al
to toggle between enable and disable
Attendant
(LED On = Enable).
This programming step gives the attendant
-OR-
station the ability to delete SMDA records
Dial
1
to Enable
“A’ITN
DELETE ON
”
Nhen commanded to do so by its user.
(Al LED On).
During day-to-day system operation, when
Dial 2 to Disable
*AmN
DELETE OFF
”
SMDA records exceed storage capacity,
:he
attendant can
delete-
current records to
3. Dial
+K
for configuration mode.
make room for additional ones if you
To change setting, repeat procedure and make opposite selection.
Derform this programming step. Typically
the attendant would do this after he or she
ias
requested the system to print an SMDA
report. If you have set the system to delete
the records after it has generated an
sutomatic report, you usually do not need
;o
give the attendant this manual deletion
ieature.