Specifications

IMl66-107 System Programming
Specialized Route Access (SRA) Configuration - continued
Special Area Code Tables: The four To assign the special area codes to the four tables,
special area code tables must first match a 1. Type I t 7 4 6 X and press RETURN,
dialed area code and then match the dialed
2. From the main menu, type 1 and press RETURN
office code with office code entries in the
for system COS menu,
matched table. With a complete match 3. From the system COS menu, type 16 for specialized route
found, the system routes the call over the access menu and press RETURN,
line group that you have assigned to the 4. From specialized route access menu, type 6 to assign area code
matched office code in the matched special to special table and press RETURN,
area code table.
5. Type l-4 to choose special table 1-4 and press RETURN,
NOTE: When programming the special
6. Type specific area code for table and press RETURN,
7. Repeat steps 4 through 5 for each remaining special table
area code tables, note that a// office
code entries are defaulted to line
and press RETURN,
8. To clear the special area code tables if needed, type 7 and
group 7; therefore, to minimize
programming effort, assign
press RETURN, then type l-4 for table 1-4 and press RETURN,
those codes with the fewest
and repeat as necessary.
entries to line groups 2 through 4.
9. Return to the system COS menu.
For example: if you are programming
T
for code entries 200 through 299,
o assign line groups to the office code entries,
and codes 000 through 209 requires
1. From the system COS menu, type 16 for specialized route
one fine group while codes
access menu and press RETURN,
210 through 299 requires another
2. From specialized route access menu, type 4 for special
line group, leave fine group 1
area code table menu and press RETURN,
assigned to the larger quantity of
3. Type l-4 for special table 1-4 and press RETURN,
entries that require the most
4. Type 14 to choose line group 1-4 and press RETURN,
programming effort (2 1 O-299)
5. Type all office code(s) that require call routing over the line
and reprogram the line group for the
group that you set in step 4; and press RETURN
smaller quantity of entries.
(type in or nnn.nnn.nnn.nnn for one code or several codes)
-OR-
(type ALL to assign every office code from 000 through 999)
6. Type 4 and repeat steps 3 through 5 to add additional line
groups to office codes in the same table or to program the
next special area code table,
7. To return to the main menu, press and hold CTRL and type C.
4-7oc
(TAB1 17~17)