Specifications
IMl66-107
System Programming
Integrated Call Costing Configuration
-
continued
Call Costing Programming Procedures
-1
Third Priority Costing For Local Calls
1. Dial 76.
“CALL COST TBL
”
And Forth Priority Costing For Long
2. Dial table number
(01
-
33).
“CALL COST TBL XX”
Distance Calls
-
Call Costing Tables
3. Dial
1
to enter matching digits.
‘XxXxXxX)(
”
when the system can not match local calls
NOTE:
Call
Cost Table
7
will
not
accept
matching digits.
snd long distance calls with the entries you 4. Dial # to clear previous digits.
nave made in any exception table, office
zode band table, zone call band table or
5. Dial matching digits for costed number (32 max.
area code band table, it compares them
# = match anything digit).
‘xxxxxxxx
”
with
youi
entries in call rate tables 2
-
10
6. Dial
+%
to end matching digits.
snd 29
-
33 and costs them accordingly.
7. Dial 2 then dial 01
-
99 for Tier 1 time in
Use these call rate tables to cost calls that
tenths of minutes.
“TIER 1 TIME XX
’
require special or extraordinary rates.
8. Dial
+I+.
9. Dial 3 then dial
001
-
999 for Tier 1 rate in cents.
The system costs any calls for which it can
“TIER
1
RATEXXX”
find no match with your entries in call rate
1
o
Dial
~
’ ’
table 1 (the table of last resort for costing all
11. Dial 4 then dial 001
-
999 for Tier 2 rate in cents.
calls).
“TIER2
RATEXXX’
12. Dial
+K
Dffice
code
band tables =
call
rate tables 18
-
24
13. Dial 6 then dial
001
-
999 for surcharge rate in cents.
Zone
call
band tables = call rate tables 25
-
28
“SURCHARGE XXX
”
9reacodebandtable=ll
-17
14.
Dial
%
%
to program next call cost table and
repeat steps 2-14 until all tables are entered.
NOTE
: Dialing a 00 or a 000 as an entry in
15. Dial
+
f
+#
for configuration mode.
steps 7, 9,
11,
and 13
will
clear the current
To change setting, repeat procedure and make different selection.
entry for those steps.
Example Call Rate Table
prog. step 2
Call Rate Table 33
prog. step 5
Number 19009762525
prog. step 7
Tier 1 Time 30 (30 mimutes)
prog. step 9 Tier 1 Rate
120 ($1.20)
prog. step 11
Tier 2 Rate
75 ($0.75)
prog. step 13
Surcharge 50 ($0.50)
Discard Digits
1. Dial 75. “SMDA PROGRAMMING”
When the digital telephone system is 2. Dial 01 to program costing bands. “COSTING BANDS
u
installed behind a host system such as a 3. Dial 4 to program discard digits.
“ASSGN
DSCRD DIGITS
”
PBX or CENTREX, users must dial access
4. Dial 1
-
6
to select entry
1
-
6.
“ENTRYX
”
codes before obtaining an outside line dial
tone. To ensure that the system costs a
5. Dial # for no discard digits.
-OR-
call on just the actual telephone number
that the user dials, you should arrange for
Dial up to 8 discard digits
the system to ignore these access codes.
then dial #.
“xxxxxxxx
I8
You can program up to six different access
6.
Repeat steps
4-5
to program next discard digit entry.
codes entries with up to eight digits per
7. Dial
%
for next costing band feature.
entry.
-OR-
.
Dial
+++
+R
for next SMDA feature.
-OR-
Dial
8
f
*
for configuration mode.
To change setting, repeat procedure and make different selection.
4-69