Specifications

System Programming IM166-107
Integrated Call Costing Configuration - continued
Call Costing Programming Procedures
Press ITCM +k#746+.
Second Priority Costing For Long
“SMDA PROGRAMMING”
Distance Calls - Zone Call Band Tables 2. Dial 01 to program costing bands. “COSTING BANDS ’
The system measures calls that do not 3. Dial 3 to program zone call bands. “ZONE BqNDS ”
match exception tables for the number of 4. Dial 0 if no zone is to be as’gned. “NOZONE ”
calls with numbers that have 10 digits or
Dial 1 - 4 for zones 1 - 4.
“ZONEX ”
more (long distance calls) to your entries in 5. Dial 200 - 999 to assign an area code.
four different zone call band tables.
tables in call rate tables 25 - 28.
code to same zone or to program next zone.
10. Dial +# C# for next SMDA feature.
Dial + +R +R for configuration mode.
To change setting, repeat procedure and make different selection.
to program costing bands.
The system matches long distance calls 3. Dial 2 to program
that do not match entries in zone call band area code bands.
“AREA CODE BANDS”
tables with your entries in seven different 4. Dial 0 if no band is to be as’gned. ‘NO BAND n
area code band tables. Program the cost
values for area code band tables in call rate Dial 1 - 7 for bands 1 - 7.
“BAND X ”
tables 11 - 17.
6. Dial 200 - 999 to as’gn area code.
5. Dial # and repeat step 6 for additional code.
6. Dial +R and repeat steps 3-6 to program next band.
7. Dial +# +++ for next SMDA feature.
Dial +Ic +R +# for configuration mode.
1 PressSPKRt0end.I .
4-68