Specifications
IMl66-107
System Programming
Integrated Call Costing Configuration
-
continued
Call Costing Programming Procedures
0
To make a record of the programming configuration, mark the desired requirements in the integrated call
costing records chart found at the end of Chapter 4. There are companies in business that formulate custom
call costing tables for use with this digital telephone system. Contact Comdial’s Inside Sales Department at
1-800-347-l 432 for complete details.
0
To make the programming selections, dial the feature code and then dial the configuration code (or.press the
programming button where appropriate).
NOTE: A lighted LED next to the programming button for the selection indicates the current configuration.
When a single button provides a togg/e (on/off) action, the lighted LED indicates the active feature.
0
The first
step in any programming sequence is to enter
the base level. Once in this mode, you can dial the
feature code for any desired configuration. Enter the base level with the following procedure: press
ITCM
then dial
+K#
7 4 6
+I+.
The last step is to press the
SPKR
button to end the programming procedure and return
the system to normal operation.
:irst Priority Costing
-
Exception Tables
1. Dial 78.
“EXCEPTION TBL
”
The
system first compares calls to your
2. Dial
1
-
4
for entry 1
-
4.
“ENTRYX
”
sntries in the call cost exception tables to
3. Dial
1
to assign the call rate table.
jetermine if it can make a match.
“CALL COST TBL XX”
4. Dial
01
-
33 for call rate table number.
5. Dial
+K.
6. Dial 2 to assign matching digits.
“X~XXXUXXXXXXW”
7. Dial #to clear current entry.
8. Dial matching digits (16 max.
#
= match anything).
‘xxm~mmx)ooo(x
9. Dial
+N
+R
for next entry, and repeat steps 2
-
9 until
all entries are made.
10. Dial
+N
+R
+#
for configuration mode.
To change setting, repeat procedure and make different selection.
Second Priority Costing For Local Calls
1. Dial 75.
3MDA
PROGRAMMING”
. Office Code Band Tables
2. Dial
01
to program costing bands. “COSTING BANDS
u
The system measures calls that do not 3. Dial
1
to program
match exception tables for the number of
off ice code bands.
“OFFCE CODE BANDS”
the digits the caller dialed. It then
4. Dial 0 if no band is to be as’gned. “NO BAND
u
compares calls with numbers that are have
-OR-
less than 10 digits (local calls) to your
Dial
1
-
7 for bands 1
-
7.
“BAND X
”
entries in seven different off ice code band
5. Dial 200
-
999 to as’gn office code.
tables. Program the cost values for these
office code band tables in call rate tables
6. Dial
#
and repeat step 5 for additional code.
18-24.
7. Dial
t
and repeat steps 4-6 to program next band.
8. Dial
+K
+K
for next SMDA feature.
-OR-
Dial
*
*
+R
for configuration mode.
To change setting, repeat procedure and make different selection.
4-67