Specifications
IM166-107
System Programming
Direct Department Calling Configuration
-
continued
r
1
Press ITCM
*#746%.
Direct
Department Calling
-
Station
Pork
1. Dial 53.
“STATION FEATURES”
You
can group stations by department to
2. Dial
19.
“DEPT. CALLING
”
~llow a call to search for an idle station
3. Dial
1
-
4 for dept.
1
-
4.
“DEPARTMENTX
within a department. This search occurs
4. Select department stations:
-
Station 10
-
57: Dial
10
-
57.
Nhen a busy or RNA is encountered at a
5. Dial
t
to program next department.
:alled department station. The system
6. Dial 5
-
8 for termination station in dept. 1
-
4.
allows up to four departments with up to 16
“DEPARTMENT X
”
stations in each one. You can place one
7. Select termination station:- Station 10
-
57: Dial 10
-
57.
additional station in each department to
8. Dial
+K
to program next department termination station..
serve
as a termination station. Calls that roll -OR-
0 a termination station will follow a call
Dial
+K
+++
for next station feature.
orward if it is set at that station.
-OR-
Dial
+K
+G
+G
for configuration mode.
Unanswered Call Transfer
1. Dial
11.
“TRANSFER
RECALL
”
Recall Time
2. Dial 2 .
“DEPT
XFR RCL XXX”
4 call that a user has transferred to a
3. Choose transfer time (LED On = Selected Time):
department that remains unanswered after
-
Dial
1
or Press
Al = 10 sec.
“STA
XFR RCL
70
”
:he
length of time that you set with this
-
Dial 2 or Press A2 = 20 sec.
‘STA
XFR RCL 20
”
xogramming
feature will return to the
-
Dial 3 or Press
A3 = 25 sec.
“STA
XFR RCL 25
*
:ransferring station for answering.
-
Dial 4 or Press
A4 = 30 sec.
“STA
XFR RCL 30
’
-
Dial 5 or Press
A5 = 45 sec.
“STA
XFR RCL 45
’
-
Dial 6 or Press
A8 = 60 sec.
“STA
XFR RCL 60
*
-
Dial 7 or Press
A9
= 90 sec.
“STA
XFR RCL 90
’
-
Dial 8 or Press
A10 = 120 sec.
“STA XFR RCL 720”
-
Dial
9
or Press
All = 180 sec.
“STA
XFR RCL
780”
-
Dial 0 or Press
Al2 = 400 sec.
“STA XFR RCL 400”
4. Press
*
for next transfer recall feature.
5. Press
X
+#
for configuration mode.
To change setting, repeat procedure and make different selection.
Press SPKR to end.
4-51