Specifications

System Programming IMl66-107
Account Code (With Positive Forced Verification) Configuration - continued
Press ITCM %#746+.
4ccount Code Message Display Time
Nhen you have enabled the account code
eature, LCD speakerphones will prompt
lsers with a displayed message that the
system clears at the end of the
xogrammable display time. Valid range for
he display time is 1 to 20 seconds The
iystem defaults the setting to 5 seconds.)
f account codes are forced, the system
drops the line if the user fails to enter a
/alid account code during the display
leriod. You also can make this prompting
nessage appear in the telephone display
Nhen the user answers an incoming call.
This will prompt users to enter account
:odes for answered calls.
To set the account code display time,
1. Dial 75.
“SMDA PROGRAMMING”
2. Dial 10.
“DISPLA Y TIME X ” ’
3. Dial 01 - 20 to select new display time (in seconds).
4. Dial f +N for configuration mode.
To change setting, repeat procedure and make different selection.
To enable or disable account code prompt for incoming calls,
1. Dial 75.
“SMDA PROGRAMMING”
2. Dial 11.
l XXXXXXX INCOMING”
3. Press Al to toggle feature on or off LED On = Enabled)
-Ol?-
Dial 1 to enable.
“ENABLE INCOMliG”
Dial 2 to disable.
‘DISABLE INCOMING”
4. Dial +# +N for configuration mode.
To change setting, repeat procedure and make opposite selection.
To enable or disable account code prompt for outgoing calls,
1. Dial 75.
“SMDA PROGRAMMING
2. Dial 12.
‘XxXxXxX OUTGOING”.
3. Press Al to toggle feature on or off (LED On = Enabled).
-OR-
4. Dial 1 to enable.
“ENABLE OUTGOING”
Dial 2 to disable.
“DISABLE OUTGOING”
5. Dial * % for configuration mode.
To change setting, repeat procedure and make opposite selection.
4-46