Specifications

IM166-107 System Programing
Station Configuration - Block Programming
Press ITCM %#746%
Block Programming
You can use this last station configuration
procedure to assign those features that you
have assigned to any one station (using the
procedures detailed on the previous pages)
to any other station or to an entire block of
stations.
1. Dial 68.
“BLK PROGRAMMING II
2. Select model station port:
- Station 10 - 57 = dial 10 - 57 or press Cl 0 - C57.
‘MODeL STA XX ”
3. Select first station port in block (same code as above).
4. Dial #.
5. Select last station port in block (same code as above).
6. Dial #.
7. Dial +% for further block programming.
-OR-
Dial +K +R for configuration mode.
NOTE: The first, last and all station ports in between will be block
programmed like the model station port. To block program
an individual station port, select the first and last port to be
the same number. (For example: 25,26# 26# programs
station 26 exact/y as 25 .)
Press SPKR to end.
4-41