Specifications
IM166-107 System
Programing
Station Configuration
-
Button Mapping
-
continued
Press ITCM 3#746%
3lank Buttons
3lank those buttons that you want to be
Dynamic line buttons or autodial buttons.
VOTE When blanking buttons, be sure a
previously assigned button is idle
(feature not selected by user) before
you blank it.
Zall
Forward Button:
This button provides one-button forwarding
If
all calls to another extension.
Call Park Orbit Button
The call park orbit button will automatically
park an active call in orbit when the user
presses it.
30 Not Disturb (DND) Button
‘ressing
the DND button prevents other
stations from calling the DND station.
1. Dial 56. “BUTTON MAPPING
a,
2. Dial 04. “BLANWAUTODIAL
”
3. Select all buttons to be programmed:
-
Press Al
-
A14, Bl
-
B8 (LED On
=
Selected).
4. Dial #.
5. Select station ports to be programmed with auto dial buttons:
-
Station 10
-
57: Dial
10
-
57
or press Cl0
-
C57.
6. Dial
+#
for further button blanking.
-OR-
Dial
#
+K
for next button mapping feature.
-OR-
Dial
*
*
+K
for configuration mode.
1. Dial 56.
“BUTTON MAPPING
’
2. Dial
11.
“ASSIGN CALL FWD
’
3. Select button to
be programmed:
-
Press
Al
-
A14,
Bl
-
B8 (LED on = Selected).
4. Select station ports to be programmed with a CALL PWD button:
-
Station 10
-
57: Dial
10
-
57
or press Cl 0
-
C57.
5. Dial
+#
for next call forward button assignment.
-OR-
Dial
#
+#
for next button mapping
feature.
-OR-
Dial
+?
++
t
for configuration mode.
To
clear, dial 5604, press button, dial
#,
select station, dial
+I++*.
1. Dial 56.
“BUTTON MAPPING
*
2. Dial 12.
“ASSIGN CALL PK
*
3. Select button to be programmed:
-
Press
Al
-
A14, Bl
-
B8 (LED Winks
=
Selected, On = Asgn’d).
4. Dial
1
-
9 for parking orbll 1
-
9.
“ASSIGN CALL PK X
5. Select station ports to be programmed with ORBIT button:.
-
Station 10
-
57: Dial
10
-
57
or press
Cl 0
-
C57.
6. Dial
+#
for next call park orbit button assignment.
-OR-
Dial
+K
+N
for next button mapping feature.
-OR-
Dial
+K
%
+K
for configuration mode.
To clear, dial 5604, press button, dial
#,
select station, dial t+#ct.
1. Dial 56.
“BU’ITON
MAPPING
”
2. Dial 07. “ASSIGN DND CODE
”
3. Select button to be programmed:
-
Press
Al
-
A14,
Bl
-
88
(LED On = Selected).
4. Select station ports to be programmed with a DND button:
-
Station 10
-
57: Dial 10
-
57.
5. Dial
+K
for further DND button assignment
-OR-
Dial
*
t
for next button mapping feature.
-OR-
Dial
*
*
++
for configuration mode.
To clear, dial 5864, press button, dial #, select station, dial
H+.
4-37