Specifications

System Programing
IMl66-107
Station Configuration - Button Mapping (Non-Square System Configuration)
You can assign (map) every programmable button at each digital station to be line select buttons to provide
access to outside lines, to be direct station select (DSS) buttons to provide quick access to system stations, to
be special purpose buttons to provide telephone users one-button access to features, or to be idle buttons to
provide autodial locations for the station user.
Three Idle buttons serve as dynamic line buttons. Dynamic line buttons provide a location for the system to
temporarily assign a line appearance to a station that normally does not have that particular line assigned to it.
While a line is in appearance there, the user can perform any normal call handling operations that he or she
wishes to perfom. They are identified as follows: Bl,B2, and 83 on DigiTech telephones (product code 77OOS,
7114X, and 7114s) or Ll , L2, and L3 on impact telephones (product codes 8012S, 80248,811 N, 8112% and
8124s) l-2,14, and L6 on Americom telephones (product codes 7010s and 7110X) or L22, l-23, and I24 on
Americom telephones (product code 7016s) . Turn to pages 4-94 through 4-99 for button illustrations if needed.
When you map a button at a station port, press the corresponding button on the programming station to select
the button to be mapped. If you must map buttons at a station port while using a programming telephone that
does not provide a full complement of buttons, you can dial a 3-digit code-to select the buttons to be mapped.
-DiarrechlmaactAmericom
120 Al
LO1 Ll
--Er
-DiaTTechlmDactAmericam
119 A9
100 Bl L17 L2
118 A2 LO2 L3
117 A10
LlO L18
101 82 L18 L4
116 A3
LO3 L5 115 All Lll
L19
102 83
L19 L6
114 A4
LO4 L7 113 Al2
L12 L2O
103 84 L20 L8
112 A5 LO5 L9
111
Al3 L13 L21
104 85 I21 LlO
110 A6 LO6 Lll 109 Al4
L14 L22 105 B6 L22 L12
108 A7
LO7 L13 122 B9
L15 L23
106 87 ,L23 L14
121 A8
LO8 L15 123 BlO
L16 I24
107 B8 L24 L16
Press ITCM *#746%
Account Code Button
Press the account code button and then
dial an account code to record a call into a
particular category without interrupting the
call.
Automatic Call-Back Button
When a user presses this button after they
encounter a busy tone, the system will
automatically ring both the called station
and the user’s station when the called
station becomes idle.
1. Dial 56.
“BlJVON MAPPING”
2. Dial 17.
“ASSIGN ACCT KEY ”
3. Select button to be programmed:
- Press Al - A14, Bl - B8 (LED On = Selected)
4. Select station ports to be programmed with ACCOUNT CODE
button:
- Station 10 - 57: Dial 10 - 57 or press Cl0 - C57.
5. Dial # for further ACCOUNT CODE button assignment.
-OR-
Dial +R % for next button mapping feature.
-OR-
Dial +# +# t for next configuration mode.
To clear, dial 5664, press button, dial #, select station, dial w.
1. Dial 56. “BUTTON MAPPING ’
2. Dial 10. “ASSIGN CALL BACK”
3. Select button to be programmed:
- Press Al - A14, Bl - B8 (LED On = Selected).
4. Select station ports to be programmed with CALL-BACK button:
- Station 10 - 57: Dial 10 - 57 or press Cl0 - C57.
5. Dial * for next auto call-back button assignment.
-OR-
Dial * * for next button mapping feature.
-OR-
Dial +# +t+ % for configuration mode.
To clear, dial 5664, press button, dial #, select station, dial ++#+.
I I
1 Press SPKR toend. 1
4-36