Specifications

I. Dial 67 to reassign station to port.
‘ASSIGN STA/PORT ”
!. Dial station extension number. 0010 - 7999.
“PHYS PORTXX ”
3. Dial physical port number 10 - 57 or press Cl 0 - C57.
“LOGICAL STA XX ”
4. Dial # to make assignment.
5. Dial * for configuration mode.
To change setting, repeat procedure and make different selection.
IMl66-107
System Programing
Station Configuration - Miscellaneous Features - continued
Press ITCM ++#746%
tation To Station Port Reassignment: You
an use this programming action to exchange
te extension number and all other
rogrammable attributes that you have
ssigned to a station at one port with a
tation at a different port (logical to physical
3assignment).
‘his feature automatically reassigns the
oftware attributes (logical assignment) of a
tation at one port to a different port without
slocating the station (physical assignment).
This feature allows you to make adds,
loves, and changes without relocating the
tation wiring.
JOTE: Do not use this feature to change
station extension numbers. Use the
Flexible Station Numbering feature
for that purpose. Also, do not
confuse this feature with the
Automatic Station Relocation feature
discussed in the system
configuration portion of these
programming procedures. Further,
note that the system will riot allow
you to ressign the station IO/station
port 10 assignment.
system Alarm Report Station: If you
arrange the system to report alarms, also use
his programming feature to enable stations
o display alarm reports after the station user
akes appropriate action.
Voice Announce Blocking: This feature
allows a station user to block voice signalled
intercom calls.
To enable the alarm reporting feature,
1. Dial 28.
“ALARM REPORTS ’
2. Press Al to toggle between enable and disable.
(LED On = Enable)
-OR-
Dial 1 to enable.
Dial 2 to disable.
3. Dial t for configuration mode.
To change setting, repeat procedure and make opposite selection.
To select the alarm reporting stations,
1. Dial 53.
“STATION FEATURES”
2. Dial 28.
“ALARM RECEIVE ’
3. Select station ports (LED On = Feature Assigned):
- Station 10 - 57: Dial 10 - 57 or press Cl0 - C57.
4. Dial ++ for next station feature.
-OR-
Dial * t for configuration mode.
To change setting, repeat procedure and make diierent selection.
1. Dial 53. “STATION FEATURES”
2. Dial 04. “VOICE BLOCK n
3. Select station ports (LED On = Feature Assigned):
- Station 10 - 57: Dial 10 - 57 or press Cl0 - C57.
4. Dial * for next station feature.
-OR-
Dial t +!c for configuration mode.
To change setting, repeat procedure and make diierent selection.
Press SPKR to end.
4-35