Specifications
System Programing
Station Configuration
-
Miscellaneous Features
-
continued
IMl66-107
1 Press
ITCM
X#746%
)
Station Names
You can assign individual names or
category names to stations. These names
will then be displayed by LCD
speakerphones when they are called by the
named stations. Typical names could be
TEC SER, MKT 1, J Smith.
System attendants also have access to this
station naming feature.
1. Dial 66.
“STATION NAMES
”
2. Select station port (LED On = Selected):
“xxxxxx
”
-
Station 10
-
57: Dial
10
-
57
or press
Cl 0
-
C57.
3. Dial # to clear current station name.
4. Refer to Table below and compose station name (7 digits max.).
5. Dial all two-digit codes necessary to enter
a new station name.
“XxXxXxX
YWWW
6. Dial
X
for next station and repeat steps 2-5.
7. Dial
+#
+K
for configuration mode.
To change setting, repeat procedure and make different selection.
-_....
Press SPKF? to end.