Specifications

IMl66-107 System Programing
Station Configuration - Miscellaneous Features - continued
Press ITCM +K#746%
SOHVA Groups - continued
The system provides eight different
ixed-configuration SOHVA groups.
Service Observing
You can give selected stations the
zapability to monitor, in an un-announced
manner, an active call at another station.
NOTE: Since this feature requires the
executive override feature to
function, the system automatically
enables that feature for the station
when you enable servicing
observing.
fou can also arrange selected stations so
:hat they cannot be serviced observed.
Station Disable
You can disable station ports on a per
station basis.
Assign Service Observing
1. Dial 53.
“STATION FEATURES”
2. Dial 10.
“SERVICE OBSERVE ”
3. Select station ports (LED On = Feature Assigned):
- Station 10 - 57: Dial 10 - 57 or press Cl 0 - C57.
4. Dial #C for next station feature.
-OR-
Dial ++ +#c for configuration mode.
To change setting, repeat procedure and make opposite selection.
Block Service Observing
1. Dial 53. “STATION FEATURES”
2. Dial 29.
“UNOBSERVABLE II
3. Select station ports (LED On = Feature Assigned):
- Station 10 - 57: Dial 10 - 57 or press Cl 0 - C57.
4. Dial +K for next station feature.
-OR-
Dial t +K for configuration
To change setting, repeat procedure and make opposite selection.
1. Dial 59.
“DISABLE STATIONS”
2. Select station ports to be disabled (LED On = Disabled):
- Station 10 - 57: Dial 10 - 57 or press Cl 0 - C57.
3. Dial +K for configuration mode.
To enable station, repeat procedure and make opposite selection.
4-33