Specifications
System Programing
Station Configuration
-
Miscellaneous Features
-
continued
IM166-107
Press ITCM %#746%
dle Line Preference
Nhen you enable idle line preference, a
;tation will automatically connect to any
assigned and idle line that you have
lrogrammed for this purpose when the
lser
takes the station off hook.
Interactive Buttons
The system supports the operation of
interactive buttons on all currently produced
Comdial proprietary LCD speakerphones.
interactive
buttons provide users with quick
easy access to system features and an
expanded display that prompts them on
feature operation and progress. DigiTech
and Impact LCD speakerphones provide
interactive buttons to the user at all times;
however, the Americom LCD
speakerphone does not provide themat.
default. You must take this programming
action to enable interactive buttons on
Americom LCD speakerphones.
When you enable interactive buttons, the
system recognizes which Americom LCD
speakerphone that the installer has
connected to the station port and assigns
the buttons accordingly. If the installer
replaces an Americom 701 OS model with a
7016s model, the system automatically
reassigns the buttons from the L3, L5, and
L7 locations to the L22, L23, and
I24
locations. The buttons on the 7016s
models are factory marked with red, blue,
and green labels while the 7010s model
includes a special button designation strip
for use when needed.
. Dial 54.
“STMINE
CONFIG.”
!. Dial 7.
“IDLE LINE PREF.
”
I.
Select line ports (LED On = Selected Port):
Line port l-14
=
Dial 01
-
14 or press Al
-
Al4
Line port
1516
= Dial
15,16
or press
Bl,
B2.
Line port 17-24 = Dial
17
-
24
or press
HOLD
then press
Al
-
A6
1. Dial # when all line ports are selected.
i. Select station ports (LED On = Feature Assigned):
-
Station 10
-
57: Dial
10
-
57
or press
Cl0
-
C57.
i.
Dial
t
when all station ports are selected.
-OR-
Dial
+#
+K
for next station/line feature.
-OR-
Dial
G#
%
+K
for configuration mode.
To
change setting, repeat procedure and make opposite selection.
I. Dial 53.
“STATION FEATURES”
!.
Dial 17.
‘SOFT KEYS”
3. Select station ports (LED On = Feature Assigned):
-
Station 10
-
57: Dial 10
-
57 or press Cl 0
-
C57.
t.
Dial
+R
for next station/line feature.
-OR-
Dial
?K
*
for configuration mode.
To change setting, repeat procedure and make opposite selection.
4-30