Specifications
System Programing
IM166-107
Station Configuration
-
Miscellaneous Features
-
continued
Press
ITCM
X#746*
A
per station/per line basis. You can
ontrol ringing for every line that has
ppearance at a station assigning
“DFLAY
RING
*
nmediate, or direct, ringing to some lines 3. Select line ports for ringing (LED On = Selected Ports):
nd delayed ringing to others.
(For no ringing, skip this assignment and go to step 4.)
Line port 1-14 = Dial
01
-
14
or press
Al
-
Al4
JOTE: Do not program direct
ringhg
Line port 15, 16 = Dial
1516
or press
Bl, 82.
for
lines that you assign to the Line port 17-24 = Dial
17
-
24
or press
HOLD
then press
Al
-
A8
direct department calling feature.
None = skip this step and make no line selection.
4. Dial # when all line ports are selected.
light Transfer (Of Ringing)
5. Select station ports (LED On = Feature Assigned):
‘ou or the system attendant can place the
-
Station
10
-
57: Dial
10
-
57
or press
Cl 0
-
C57.
#ystem
into the night transfer (of ringing)
6. Dial
+K
when all station ports are selected.
node of operation. While in this mode of
operation, the system will activate special
Dial
+#
+#
for next station/line ringing assignment
ine/station ringing assignments. Use this
lrocedure to program these assignments.
Dial
+K
+#
#+
for configuration mode.
“STMINE
CONFIG”
“NIGHT RING”
3
3. Select line ports for night ringing (LED On = Selected Ports):
Line port I-14
=
Dial 01
-
14 or press Al
-
Al4
Line port
15,16
= Dial
1516
or press
Bl, B2.
Line port 17-24 = Dial 17
-
24
or press
HOLD
then press
Al
-
Al
4. Dial # when all line ports are selected.
5. Select station ports (LED On = Feature Assigned):
-
Station 10
-
57: Dial
10
-
57
or press
Cl0
-
C57.
6. Dial
f
when all station ports are selected.
Dial
+R
+K
for next station/line feature.
To put the system in the night transfer (of ringing) mode of
“NIGHTXFER XXX
”
2. Press
Al
to toggle between enable and disable
(LED On = Enabled).
Dial 1 to enable (Al LED on).
Dial 2 to disable.
3. Dial
+K
for configuration mode.
“NIGHTXFER ON
u
“NIGHTXFER OFF
”
To change setting, repeat procedure and make opposite selection,
4-28