Specifications
lM166-107 System Programing
Station Configuration
-
Miscellaneous Features
-
continued
Press ITCM S#746%
4utomatic Privacy/Privacy Release
fou
can make a line private or non-private.
n the private mode, a station has exclusive
Jse of a line during a call. You can arrange
‘or individual stations to automatically
-elease privacy while on certain private
ines. With this arrangement, other stations
:an join that particular station whenever it is
>n
the line that you have assigned as a
Drivacy release line.
Call Foward On Busy/Ring
-
No Answer
The system can automatically forward busy
and ring-no answer calls that callers make
to one station to another station for
answering. The system sends these calls
to any idle station associated either by
intercom hunt group or by department with
the called station. Use this feature to
arrange for calls to cycle rapidly through
such associated stations testing each one
in turn with several rings.
NOTE:
If you enable ‘this feature, also
program the system intercom
signalling as tone for the first choice.
To make a line private or non-private,
1. Dial 40. “PRIVACY RELEASE
”
2. Select line ports to be non-private (LED On = Non Private Port):
Line port 1-14 = Dial
01
-
14
or Press
Al
-
Al4
Line port 15,16 = Dial
1516
or press
Bl,
B2
Line port 17-24 = Dial
17
-
24
or press
HOLD
then press
Al
-
A8
3. Dial
+K
for configuration mode.
To change setting, repeat procedure and make opposite selection.
To arrange for a station to automatically release
privacy on private lines,
1. Dial 54.
“STMJNE
CONFIG.”
2. Dial 4.
“PRIVACY RELEASE”
3. Select line ports (LED On = Selected Ports):
Line port 1-14 = Dial
01
-
14
or press
Al
-
Al4
Line port 15,16 = Dial
15,16
or press
Bl
, 82.
Line port 17-24 = Dial
17
-
24
or press
HOLD
then press
Al
-
A8
4.
Dial # when all line ports are selected.
5. Select station ports (LED On = Feature Assigned) :
-
Station 10
-
57: Dial
10
-
57
or press
Cl0
-
C57.
6. Dial
X
when all station ports are selected.
-OR-
Dial
+K
+#
for next station/line feature.
-OR-
Dial
G++
+
#?
for configuration mode.
To change setting, repeat procedure and make opposite selection.
To enable call forwarding,
1. Dial 53.
“STATION FEATURES”
2. Dial 21.
=CALL
FWD RNA
’
3. Dial 0
-
9 for 0
-
9 rings before forwarding.
“RING S= X
”
4. Select station ports (LED On = Feature Assigned):
-
Station 10
-
57: Dial
10
-
57
or press Cl 0
-
C57.
5. Dial
+K
for additional station ring assigments.
-OR-
Dial
++
+K
for next station feature.
-OR-
Dial
+K
+K
X
for configuration mode.
To change setting, repeat procedure and make different selection.
To
set
tone first intercom signalling,
1. Dial 16.
“XxXxX
ANN. FIRST”
2. Press
Al
to toggle from Voice To Tone (LED Off = Tone).
-OR-
Dial 2 for Tone First. “TONE ANN. FIRST”
3. Dial
f
for configuration mode.
To change setting, repeat procedure and make opposite selection.
4-25