Specifications
System Programing IMl66-107
Station Configuration
-
Miscellaneous Features
-
continued
I
Press
ITCM
f#746%
1
9udible Monitoring
The
DSS/BLF at a multiline station provides
I
visual indication of idle, busy and ringing
status of the monitored stations. You can
~lso
provide audible indication of direct and
jelayed ringing for selected stations;
iowever, you must first enable the station
nonitoring feature on a system-wide basis.
Automatic Hold
When you enable this feature, the
telephone user can automatically place an
existing line call on hold when she or he
Dresses another line button to answer a
second call.
&utomatic Hold For Intercom
If you want the telephone user to also have
:he automatic hold feature while he or she
s on an existing intercom call and presses
another intercom button or*a line button,
take this additional programming action.
To enable the station monitoring feature,
1. Dial 20.
“MONITOR XXXXXXX”
2. Press
Al
to switch between enable and disable
(
LED
On
=
Enable).
-Ol?-
Dial
1
to Enable
“MONITOR ENABLED”
-Ol?-
Dial 2 to Disable.
“MONITOR DISABLED”
3. Dial
+K
for configuration mode.
To change setting, repeat procedure and make opposite selection.
To assign audible monitoring to stations,
1. Dial 53.
‘STATION FEATURES”
2. Dial 20.
‘AUDIBLE MONITOR
’
3. Dial
1
for no audible monitoring.
“NONE
”
4. Dial 2 for direct ring monitoring.
“DIRECT RING
’
5. Dial 3 for delayed ring monitoring.
“DELAYED RING
*
6. Select stations ports (LED On = Feature Assigned)):
-
Station 10
-
57: Dial
10
-
57
or press
Cl0
-
C57.
7. Dial
G#
next monitoring condition.
-OR-
Dial
++c
+R
for next station feature.
-OR-
Dial
+I+
G+C
CR
for configuration mode.
To change setting, repeat procedure and make different selection.
To enable automatic hold for line calls,
1. Dial 53.
‘STATION FEATURES”
2. Dial
11.
#AUTO
HOLD
n
3. Select station ports (LED On = Feature Asssigned):
-
Station 10
-
57: Dial
10
-
57
or press
Cl0
-
C57.
4. Dial
*
for next station feature.
-OR-
Dial
+N
f
for configuration mode.
To change setting, repeat procedure and make opposite selection.
To enable automatic hold for intercom calls,
1. Dial 53.
“STATION FEATURES”
2. Dial 12.
“ITCM AUTO HOLD”
3. Select station ports (LED On = Feature Assigned):
-
Station 10
-
57: Dial
10
-
57
or press
Cl 0
-
C57.
4. Dial
+R
for next station feature.
-OR-
Dial
+I+
%
for configuration mode.
To change setting, repeat procedure and make opposite selection.
4-24