Specifications

System Programming IMl66-107
Line Configuration - Block Programming
3lock Programming
lou can use this line configuration
rrocedure to assign those features that you
rave assigned to any one line (using the
Brocedures detailed on the previous pages)
o any other line or to an entire block of
ines.
Line Button Method
1. Dial 42. “BLK PROGRAMMING ’
2. Select model line port.
“MODEL LINE XX ”
Line port l-l 4 = Press Al - Al 4
Line port 15,16 = Press Bl , B2
Line port 17-24 = Press HOLD then press Al - AS.
3. Select lines to match model line (as detailed above).
4. Dial % and repeat steps 2 and 3 for next model line.
-OR-
Dial t t for configuration mode.
Keypad Method
1. Dial 42. “BLK PROGRAMMING ”
2. Select model line port
“MODEL LINE XX ”
Line port 1 - 24 = Dial 01 - 24.
3. Dial first line port in block (dial 01 - 24).
4. Dial #.
5. Dial last line port In block (dial 01 - 24).
6. Dial #.
7. Dial +C for next model line.
-OR-
Dial +R X for configuration mode.
NOTE: The first, last and all lines in between will be block
programmed like the model line. To block program
an individual line, select the fitst line and last line to be
the same number. For example: 01, 02#, 02#
programs line 02 the same as line 01 is programmed.
4-21