Specifications

IM166-107
System Programming
1
Line Configuration - continued
Press ITCM W746+.
Use/Tone Switchable
f the installer has connected rotary dial
ines to the system, you must condition
hose line ports as pulse dial ports.
Iltemately, if the installer has connected
one dial lines to the system, you must
:ondition those line ports as tone dial ports.
The user can switch from pulse (rotary dial
SignaIling) to tone (dual tone multiple
‘requency - DTMF) for accessing special
zircuits requiring DTMF tones such as
Danking machines, etc when they need to
do so while on a rotary dial line.
To condition line ports for pulse dialing,
1. Dial 36. “PULSE DIAL ”
2. Select pulse dial line ports (LED On = Pulse Dial Line Port):
Line port 1-14 = Dial 01 - 14 or Press Al - Al4
Linepoti15,16=Dial15,16orpressBl,B2
Line port 17-24 = Dial 17 - 24 or press HOLD then press Al - A&
-OR-
Dial 00 to default all lines to pulse dial.
3. Dial +R for configuration mode.
To change setting, repeat procedure and make different selection.
To condition line ports for tone dialing,
1. Dial 37
“TONE DIAL n
2. Select tone dial line ports (LED On = Tone Dial Line Port):
Line port l-14 = Dial 01 - 14 or Press Al - Al4
Line port 1516 = Dial 15,16 or press Bl, B2
Line port 17-24 = Dial 17 - 24 or press HOLD then press Al - A6
-OR-
Dial 00 to default all lines to tone dial.
3. Dial +R for configuration mode.
To change setting, repeat procedure and make different selection.
1 Press SPKR to end. 1
4-20