Specifications
System Programming
IMl66-107
Press
ITCM %#746%.
Line Configuration
-
continued
Line Port Functions To program an auxiliary line port,
rvl
im:
You can condition a line 1. Dial 32. “AUXlLlARY LINES
Dart
to serve as a port for an external
2. Select line ports to be assigned (LED On = Aux. Line Port).
Daging
amplifier.
Line port 1-14 = Dial
01
-
14
or Press
Al
-
Al4
n
. .
,
#entral
Off ce I
III&Z
You can condition line Line port 15, 16 = Dial
15,16
or press
Bl,
82
ports to serve as a ports for standard Line port 17-24 = Dial 17
-
24 or press HOLD then press
Al
-
A8,
telephone company supplied central off ice
3. Dial
f
for configuration mode.
lines.
To change setting, repeat procedure and make different selection.
To program central office line ports,
1. Dial 33.
TC.0.
LINES”
’
2. Select line
po&to
be assigned (LED On = CO Line Port).
Line port 1-14 = Dial
01
-
14
or Press
Al
-
Al4
Line port 15,16 = Dial
15,16
or press
Bl,
82
Line port 17-24 = Dial 17
-
24 or press HOLD then press
Al
-
A8,
3. Dial
t
for configuration mode.
To change setting, repeat procedure and make different selection.
Line To Line Port M-Assignment
1. Dial 41.
mASSIGN
LOGICAU’HYS
’
You can reassign the programming
2. Select currently assigned line port number. “PHYS LATCH XX
*
attributes for a line that the installer has Line port 1-14 = Dial
01
-
14
or Press
Al
-
Al4
Eonnected to a particular line port to a
Line port 15, 16 = Dial
15,16
or press
Bl, B2
different line port with this programming Line port 17-24 = Dial 17
-
24 or press HOLD then press
Al
-
A8
action (logical to physical reassignment).
3. Dial new line port number
(01
-
24 = line 1
-
24).
This feature allows you to automatically
“LOGICAL LINE XX
*
exchange all software attributes for a line
(logical assignment) connected at one line
4. Dial # to make assignment.
sort
with those attributes assigned to
5. Repeat steps 2 -4 for another assignment.
-OR-
another line at a different line port without
Dhysically re-locating the lines (physical
assignment) or reprogramming any of the
attributes.
6. Dial
+K
for configuration mode.
To change setting, repeat procedure and make different selection
or make same port selections in both steps 2 and 3 to match
logical to physical assignment.
4-19