Specifications
IMl66-107 System Programming
I
Line Configuration
-
continued
Press ITCM
+%#746+%.
Automatic Privacy, Privacy Release
You can make a line private or non-private.
In the private mode, a station has exclusive
use of a line during a call. Lines are private
unless you re-program them and make
them non-private. Further, you can arrange
for individual station to automatically
release privacy while on certain lines. With
this arrangement, other stations can join
that particular station whenever it is on the
privacy release line.
Line Disable
Take a line port out of service when
necessary (because of defect or some
other reason) using this programming
procedure.
To make a line private or non-private,
1. Dial 40.
“PRIVACY RELEASE
”
2. Select line ports to be non-private (LED On = Non Private):
Line port 1-14 = Dial
01
-
14
or Press
Al
-
Al4
Line port
1516
= Dial
15,16
or press
Bl
,B2
Line port 17-24 = Dial
17
-
24
or press
HOLD
then press
Al
-
A8
3. Dial
+R
for configuration mode.
To change setting, repeat procedure and make different selection.
To arrange for a station to automatically release privacy on a
private line,
1. Dial 54.
“STMINE
CONFIG.’
.
2. Dial 4.
“PRIVACY RELEASE
3. Select line ports for privacy release (LED On = Privacy Release):
Line port 1-14 = Dial
01
-
14
or press
Al
-
Al4
Line port
15,16
= Dial
15,16
or press
Bl,
82.
Line port 17
-
24 = Dial
17
-
24
or press
HOLD
then press
Al
-
AI
4. Dial # when all line ports are selected.
5. Select station ports to be programmed:
-
Station 10
-
57: Dial
10
-
67
or press
Cl 0
-
C57.
6. Dial
+#
when all station ports are selected.
-OR-
Dial
+C
+I?
for next station/line feature.
-OR-
Dial
t
G#
+#
for configuration mode.
To change setting, repeat procedure and make different selection.
1. Dial 31.
PISABLE
LINES
’
2. Select line ports to be disabled (LED On = Line Disabled).
Line port 1-14 = Dial
01
-
14
or Press
Al
-
Al4
Line port
15,16
= Dial
15,16
or press
Bl
,B2
Line port 17-24 = Dial
17
-
24
or press
HOLD
then press
Al
-
A8
3. Dial
#
for configuration mode.
Return the line to service with the
U&&&%&Q
programming procedure.
(
Press SPKR to end.
1
4-16