Specifications

System Programing
IMl66-107
System Configuration -Timing Features
Press ITCM %#746+#
recall time: (LED On = Selected Time)
- Dial 1 or press Al = 1 min. “C.P. RECALL 1 ”
Wogramming feature automatically
- Dial 2 or press A2 = 2 min.
“C.P. RECALL 2 ”
etums to a timed hold recall condition
- Dial 3 or press A3 = 3 min
“C.P. RECALL 3 ’
it the parking station.
- Dial 4 or press A4 = 4 min.
“C.P. RECALL 4 ”
- Dial 5 or press A5 = 5 min.
“C.P. RECALL 5 ”
- Dial 6 or press A6 = 6 min
“C.P. RECALL 6 *
- Dial 7 or press A9 = Never Recall
‘NEVER RECALL”
3. Dial % for configuration mode.
To change setting, repeat procedure and make different selection.
htomatic Dialing
iNhen a telephone user dials a number
- Dial 01 or press Al = 60 msec.
automatically (autodial, saved number
- Dial 02 or press A2 = 60 msec.
redial, etc), the duration of the
- Dial 03 or press A3 = 100 msec.
“DTMF DIALNG lb0 ’
generated DTMF tones are as you set
- Dial 04 or press A4 = 120 msec . “DTMF DIALNG 720 M
them with this programming option.
“DTMF DIALNG 760 *
This is useful when automatically dialed
- Dial 05 or press A5 = 160 msec.
- Dial 08 or press A6 = 240 msec.
PTMF DIALNG 240 *
numbers access answering machines,
banking computers, voice mail, etc that
- Dial 07 or press A7 = 320 msec.
“DTMF DIALNG 320 n
require DTMF tones that are longer
- Dial 08 or press A8 = 400 msec.
“DTMF DIALNG 400 u
than standard tones.
- Dial 09 or press A9 = 480 msec.
“DTMF DIALNG 480 u
- Dial 10 or press A10 = 560 msec.
“DTMF DIALNG 560 u
- Dial 11 or press All = 720 msec.
=DTMF DIALNG 720 u
- Dial 12 or press Al2 = 680 msec.
“DTMF DIALNG 880 ”
- Dial 13 or press Al3 = 1040 msec. PTMF DIALNG 7040”
3. Dial +R for configuration mode.
To change setting, repeat procedure and make different selection.
Pause Time
During auto dials and speed dials, it is 2. Select time: (Program button LED On = selected time)
sometimes necessary to delay the
- Dial 1 or Press Al = .5 sec.
“PAUSE TlME 0.50 ”
sending of digits to give switching
- Dial 2 or Press A2 = 1 sec.
“PAUSE TIME 1 ”
equipment time to prepare for receiving
- Dial 3 or Press A3 = 1.5 sec.
“PAUSE TIME 1.50 u
them. A pause is stored for this
- Dial 4 or Press A4 = 2 sec. MPAUSE TIME 2 ”
purpose whenever the user presses
the HOLD button. You can set the
- Dial 5 or Press A5 = 3 sec. “PAUSE TlME 3
”
length of a pause with this
- Dial 6 or Press A8 = 5 sec. ‘PAUSE TIME 5 ”
programming feature.
- Dial 7 or Press A9 = 7.5 sec. “PAUSE TIME 7.50 *
- Dial 8 or Press A10 = 10 sec. “PAUSE TIME 70 ’
- Dial 9 or Press All = 15 sec. “PAUSE TIME 15 ”
- Dial 0 or Press Al2 = 20 sec.
“PAUSE TIME 20 u
3. Dial % for configuration mode.
To change setting, repeat procedure and make different selection.
System Configuration Timing Features continued on next page . . .
(1
4-12