Specifications

IMl66-107
System Programing
System Configuration - Miscellaneous Features - continued
Press ITCM ++#746+k
Tandem Attendant
1. Dial 24.
“TANDEM ATTN XXX ’
When you enable this feature, a recall 2. Press Al to toggle between enable and disable (LED On = Enable).
from an unanswered call transfer or
-OR-
timed hold recall will ring at both
Dial 1 to enable.
“TANDEM ATN OFF
attendant stations. When you disable
Dial 2 to disable
it, only the attendant station that
(Al LED is on).
“TANDEM Al7N ON ’
transferred the call will ring.
3. Dial % for configuration mode.
To change setting, repeat procedure and make opposite selection.
Tone or Voice Signailing
1. Dial 16.
“XXXXX ANN. FIRS7
Intercom calls can be tone signalled or 2. Press Al to toggle between Voice To Tone.
voice signalled. Use this programming
(LED On = voice signalling).
feature to select the system’s signalling
-OR-
choice. With either method set as the
Dial 1 for Voice First.
“VOICE ANN. FIRST”
system’s first choice, the user can
Dial 2 for Tone First.
“TONE ANN. FIRST”
choose the other method as needed.
3. Dial G# for configuration mode.
To change setting, repeat procedure and make opposite selection.
Press SPKR to end.
4-l 1