Specifications
IM166-107
System Programing
System Configuration
-
Miscellaneous Features
-
continued
Press ITCM +##746t
station
Monitoring:
The DSS/BLF at a
;tation provides idle, busy, and ringing
status
of all of the monitored stations.
f users deem the flashing BLF lights
associated with visual ring indication
Gstracting, you can disable this visual
ndication system-wide using this
xocedure.
f you enable this visual ring indication,
(ou
can also enable audible indication
If
both direct and delayed ringing on a
)er station basis if you wish.
system Alarm Reporting:
The system
:an send special codes that convey
:ertain system alarm conditions to
selected stations where they will show
In
their LCD displays.
To
enable visual ring indication,
1. Dial 20.
“MONITOR XXXXXXX”
2.
Press
Al
to toggle between enable and disable (LED On = Enable).
-OR-
Dial 1 to Enable
“MONITOR ENABLED”
(Al LED ON).
Dial 2 to Disable.
‘MONITOR DISABLED”
3. Dial
*
for configuration mode.
To change setting, repeat procedure and make opposite selection.
To assign audible monitoring,
1.
Dial 63.
3TATiON
FEA TlJRES”
2. Dial 20.
“AUDIBLE MONITOR
*
3. Dial
1
for no audible monitoring.
‘NONE
n
4. Dial 2 for direct ring
monitoring.
‘DIRECT RING
’
5. Dial 3 for delayed ring
monitoring.
“DELAYED RING
’
5. Select station ports (LED On = Selected):
-
Station
10
-
57: Dial
10
-
57
or press
Cl0
-
C57..
7. Dial
+#
next monitoring condition.
-OR-
Dial
f
+#
for next station feature.
-OR-
Dial
#+
++
+#
for configuration mode.
To change setting, repeat procedure and make different selection.
To enable the alarm reporting feature,
1. Dial 28.
“ALARM REPORTS
”
2. Press
Al
to toggle between enable and disable.
(LED On = Enable)
-OR-
Dial
1
to enable.
Dial 2 to disable.
3. Dial
+#
for configuration mode.
To change setting, repeat procedure and make different selection.
To select the alarm reporting stations,
1. Dial 53.
=STATION FEA TlJRES”
2. Dial 28.
“ALARM RECEIVE
’
3. Select station ports (LED On = Selected):
-
Station 10
-
57: Dial
10
-
67
or press
Cl0
-
C57.
4. Dial
*
for next station feature.
-OR-
Dial
%
+#
for configuration mode.
To change setting, repeat procedure and make different selection.
1
Press SPKR to end. 1
4-9