Installation Instructions

Americana Building Products .

Sierra Patio Cover Installation Guide

OPTIONAL BIRD PLUG INSTALLATION

Note: When installing bird plugs while installing roof

panels, it is important NOT to completely tighten the

screws attaching to the header. This will make it

significantly easier to install the bird plugs.

If installing bird plugs with the roof already completed, it

may be necessary to loosen the screws attaching the

roof panels to the header.

Install (2) roof panels (G) according to the

instructions on pages 21-22. Insert a bird plug (X)

between the roof panels and header (D). Slide the

plug toward the front of the cover until the back of

the plug is flush with the back of the header.

Repeat this step and the steps on pages 21-22 until

all roof panels are installed. Then, tighten all screws

and make sure bird plugs (X) are held firmly in

place.

SIDE VIEW