Installation Instructions

Americana Building Products .
25
Sierra Patio Cover Installation Guide
The remaining steps are completed the same for 10” ‘V’
style roof panels (G) and 8” flat style roof panels (V).
10” ‘V’ style roof panels are shown.
STEP 15
Starting at one end, install front gutter (E) to each
fascia clip (J) by fitting the upper lip of the gutter
into the slot at the top of the clip.
Roll front gutter (E) forward and lock the lower lip of
the gutter between fascia clip (J) and roof panel (G).
Caulk the exposed edges of the flashing plug in
front gutter (E) to prevent sliding and leaks.
GUTTER SPLICE - OPTIONAL
Complete this step only if front gutter (E) is in two or
more pieces.
Apply a generous amount of caulk around the
crimped end of front gutter (E). Insert the crimped
end into the square end of another piece of front
gutter and attach using (3) #8 x 3/4” screws (AA).
15