User`s manual

BIOS Setup
25
l Main
This setup page includes all the items in standard compatible BIOS.
l Advanced
This setup page includes all the items of AWARD special enhanced features.
(ex: Auto detect fan and temperature status, automatically configure hard disk parameters.)
l Boot
This setup page includes all the items of first boot function features.
l Server
This setup page includes the main function features of auto detect fan and temperature status.
l Security
Change, set, or disable password. It allows you to limit access to the system and Setup,
or just to Setup.
l Clk/Voltage
This setup page includes control CPU’s clock and frequency ratio.
l Defaults
Load Optimized Defaults option and loads preset system parameter values to set the system in
its highest performance configurations.
l Exit
Save CMOS value settings to CMOS and exit setup or abandon all CMOS value changes
and exit setup.
GETTING HELP
Main Menu
The on-line description of the highlighted setup function is displayed at the bottom of the screen.
Status Page Setup Menu / Option Page Setup Menu
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible
selections for the highlighted item. To exit the Help Window press <Esc>.
Q-Flash Utility
After power on the computer, pressing <Del> immediately during POST (Power On Self Test) it will
allow you to enter Award BIOS CMOS SETUP, then press <F8> to enter Q-Flash utility. If you
request detail information for “Q-Flash Utility “, please download the manual from
Gigabyte web http://www.gigabyte.com.tw.