Installation guide

6. Configure BIOS Parameters

Due to heavy traffic between IO devices and motherboard, the optimum BIOS

configuration is necessary for Digital Video Recorder system to have stable operation.

When you finish assembling Capture Cards, Flash Module, and Hard Disk,

please connect the keyboard and mouse before turning on power for setting BIOS.

After power on, you will see a flash screen of display logo followed by a POST

(power on self-test) screen with sentence “Hit DEL if you want to run SETUP”.

Press DEL to enter BIOS setup menu.

There are only few keys used in this setting: Direction keys are used to select

entities of functions. [Page Up], [Page Down], and [Tab] are used to switch options of

function.

You can select [Load Optimize Default] in the main menu to load optimum

setting, then please refer to the setting listed in the next section.