Installation guide

Install the Capture Cards

This section describes the installation procedures on GigaByte GA-8IEX

motherboard (w/ Intel 845E chipset) as an example.

Please install all interface cards as the photo (Fig 3-1) below:

1. Insert the display card into the AGP slot.

2. Insert 4 capture cards into 1

, 2

, 3

, 4

PCI slots.

3. Insert the network interface card into the last PCI slot.

4 capture cards

here

AGP slot for

display card

Network card

here

Fig 3-1 DVR-800 & 1600 capture cards installed on GA-8IEX

Remark:

The example above is the installation procedure on GA-8IEX motherboard. For

the other motherboard with Intel 845E/SiS 645DX/SiS648 chipset, the

installation procedure is similar to the above procedures.