User`s manual

Technical Reference
- 23 -
English
Frequency/Voltage Control
Figure 8: Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2002 Award Software
Frequency/Voltage Control
CPU Clock Ratio [ 15X] Item Help
CPU Host Clock Control [Disable] Menu Level
øCPU Host Frequency(MHz) 100
øFixed PCI/AGP Frequency 33/66
Host/DRAM Clock ratio [Auto]
Memory Frequency(MHz) 266
PCI/AGP Frequency(MHz) 33/66
DIMM OverVoltage Control [Normal]
AGP OverVoltage Control [Normal]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.75V
higf: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F3:Language F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
FCPU Clock Ratio
Set CPU Ratio if CPU Ratio is unlocked.
810X~ 24X It’s depends on CPU Clock Ratio.
FCPU Host Clock Control
Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot . When
time out occur, system will reset and run at CPU default Host clock at next boot.
8Disable Disable CPU Host Clock Control.(Default value)
8Enable Enable CPU Host Clock Control.
FCPU Host Frequency (MHz)
8100MHz ~ 350MHzSet CPU Host Clock from 100MHz to 350MHz.
øThose items will be available when "CPU Host Clock Control" is set to Enabled.