User`s manual

- 18 -GA-8IEX Series Motherboard
English
FACPI Suspend Type
8S1/POS Set ACPI Suspend Type to S1/POS (Power On Suspend). (Default value)
8S3/STR Set ACPI Suspend Type to S3/STR (Suspend To RAM).
FSoft-off by PWR-BTTN
8Instant-off Press power button then Power off instantly. (Default value)
8Delay 4 Sec. Press power button 4 sec to Power off. Enter suspend if button is pressed less
than 4 sec.
FPME Event Wake up
MWhen set at Enabled, any PCI-PM event awakes the system from a PCI-PM controlled
state.
MThis feature requires an ATX power supply that provides at least 1A on the +5VSB
lead.
8Disabled Disabled PME Event Wake up function.
8Enabled Enabled PME Event Wake up function. (Default Value)
FModem Ring On/ WakeOnLAN (When AC Back Function is set to [Soft-Off])
MYou can enable wake on LAN feature by the "ModemRingOn/WakeOnLAN" or "PME Event Wake
up" when the M/B has "WOL" onboard connector. Only enabled the feature by "PME Event Wake
up".
MAn incoming call via modem awakes the system from its soft-off mode.
MWhen set at Enabled, an input signal comes from the other client/server on the LAN awaks the
system from a soft off state if connected over LAN.
8Disabled Disabled Modem Ring On / Wake On LAN function.
8Enabled Enabled Modem Ring On / Wake On LAN function. (Default Value)
FResume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
8Disabled Disable this function. (Default Value)
8Enabled Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Date ( of Month) Alarm : Everyday, 1~31
Time ( hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)