User`s manual

Technical Reference
- 15 -
English
FUR2 Duplex Mode
MThis feature allows you to select the IR modes.
8Half IR Function Duplex Half. (Default Value)
8Full IR Function Duplex Full.
FOnBoard Parallel port
MThis feature allows you to select from a given set of parameters if the parallel port uses the
onboard I/O controller.
8378/IRQ7 Enable On Board LPT port and address is 378.(Default Value)
8278/IRQ5 Enable On Board LPT port and address is 278.
83BC/IRQ7 Enable On Board LPT port and address is 3BC.
FParallel Port Mode
MThis feature allows you to connect with an advanced print via the port mode it supports.
8SPP Using Parallel port as Standard Parallel Port using IRQ7. (Default Value)
8EPP Using Parallel port as Enhanced Parallel Port IRQ5.
8ECP Using Parallel port as Extended Capabilities Port using IRQ7.
8ECP+EPP Using Parallel port as ECP & EPP mode.
FECP Mode Use DMA
83 Set ECP mode use DMA 3. (Default value)
81 Set ECP mode use DMA 1.
FGame Port Address
8Disabled Disabled this function.
8201 Set Game Port Address to 201. (Default Value)
8209 Set Game Port Address to 209.