Operator`s manual



D. MOUNTING THE ATN NVM-14 TO A SCOPE OR

TELESCOPE

The NVM-14 may be mounted to a variety of daytime scopes/



1. Loosen the adapter fixing screws (A).

2. Put the insert into the adapter (ATN supplies inserts of diffe-





the monocular rail into the bracket guide (C) and then take it off

the bracket only when you loosen the fixation knob (D) holding

-

ened you secure the monocular on the bracket.

4. Push a daytime riflescope or telescope eyepiece into the

adapter attached to the monocular, making sure a small space is

lef t between the scope eyepiece and the monocular front lens.

5. Tighten the adapter screw (A) securely.



-

time scope only.

Figure 3-4

Mounting the ATN NVM-14 to a scope