Operator`s manual


C. MOUNTING THE ATN NVM-14 TO THE WEAPON
CAUTION
It is recom m e nded t hat t he eye cup b e re p laced wit h th e eye -
guard when used mounted on the weapon.
NOTE
The ATN NVM-14 is not a weapon sight, however, it can be used
in conjunction with a collimated dot sight or laser aiming device.
To mount the ATN NVM-14 per form the following:
1. Loosen the clampin g knob on t h e weapon mount. Posit i o n th e
monocular mount onto the weapon’s mounting rail, adjust the
fore/aft position of the monocular as necessary by loosening
the clamping knob and repositioning the weapon mount on the
rail. Tighten by turning the clamping knob.
2. A l i g n the monoc u l ar and t h e weapon m ount . Slid e the monoc -
ular rearwards until the alignment boss aligns with the align-
ment groove on the weapon mount. Push until the monocular

Figure 3-3
Attaching ATN NVM-14 to Weapon Mount