Operator`s manual


B. MOUNTING THE ATN NVM-14 TO A HELMET
Attachment of ATN NVM-14 to a range of ballistic helmets. The
Helmet mount fits securely onto helmet via a rugged strapping

be positioned directly in front of user’s eyes or flipped up out of
viewing position.
1. Install the mount onto helmet as shown on the picture.
2. Tighten and fixate the straps (A)

4. Loosen screw (C). Push button (B) and insert the bracket of the
NVM-14 into rail (D) of the helmet mount.
5. Place the helmet with NVM-14 onto head.
6. Loosen the screw (C) and move the your unit for proper eye
relief adjustment.
7. The NVM-14 helmet mount has a flip-up mechanism. Push the
button (E) on the side of mount and lift the unit up until the unit

top/up position it will turn off automatically.

Turn the device on for continuation of the operation.

order to re-adjust the monocular for use with another eye,
take the unit off the helmet mount, turn the unit to other side

side. Push the button (E) and move the device along the
slide-rail (G) for comfortable position.
Figure 3-2
Attaching ATN NVM-14 to Helmet Mount
B
A
A
C
D
E
G
F